Open Collections

Bieber, Levi Michael

University of British Columbia

Today’s state-of-the-art voltage-source-converter high-voltage direct-current (VSC-HVDC) technology uses modular-multilevel converters (MMCs) for their highly efficient AC/DC conversion and filterless operation. However, half-bridge submodule-based (HBSM) MMCs lack inherent DC-fault protection and require significantly more capacitive energy storage than the previous generation of converters, leading to converter stations of immense size and cost. This dissertation proposes six novel VSC-HVDC-based technologies that amend the MMC’s disadvantages. Firstly, this dissertation presents three converter technologies: the Hybrid Three-Level Converter (H3LC), the Thyristor-based Hybrid Three-Level Converter (TH3LC), and the Hybrid Five-Level Converter (H5LC), which use AC-side cascaded submodules (SMs) and share a similar operating principle. Secondly, three converters that use DC-side cascaded SMs are proposed, including the Dual-Arm Converter (DAC), the Quad-Arm Converter (QAC), and the Multiplexed-Stack Converter (MSC), which require fewer SMs than the MMC by using proposed multiplexed converter arms (M-Arms). All the proposed converters have DC-fault protection enabled inherently --- for the TH3LC, DAC, QAC, and MSC --- or by novel DC-fault-blocking mechanisms in the cases of the H3LC and H5LC. Results from HVDC-scale simulation studies are presented for all converters to demonstrate their proposed operating principles as well as to determine their expected semiconductor losses; meanwhile, lab-scale hardware verifications are presented for three converters. Analytical methods are proposed to programmatically calculate the converters' theoretical energy storage requirements and semiconductor losses. The proposed converters all have reduced energy storage requirements compared to the MMC, with the H3LC requiring approximately one-tenth of the MMC's energy storage. The TH3LC displays the highest efficiency of the proposed converters and has inherent DC-fault tolerance. The H5LC is demonstrated to have higher efficiency than the HBSM-MMC and the least number of SMs. The DAC uses only two M-Arms for AC/DC conversion and is inherently DC-fault tolerant. The QAC uses four SM-based stacks without DC-side capacitors. The MSC uses four SM-based stacks without DC-side capacitors and has DC-fault ride-through capability. The high efficiency and compactness of these converters are expected to facilitate their widespread acceptance throughout the industrial and academic communities.

Text

2024-02-01

Attribution-NonCommercial-NoDerivatives 4.0 International

http://hdl.handle.net/2429/83819

Electrical Engineering

University of British Columbia

UBCO

http://creativecommons.org/licenses/by-nc-nd/4.0/