Open Collections

Hahn, Samuel

University of British Columbia

This work seeks to conceptualize a novel pilot process for valorizing hemp hurd residues. Presented here are three proof-of-concept investigations and a simple gross profit analysis to motivate the development of a zero-waste, integrated biomaterials production process for co-production of lignified cellulose nanomaterials, lactic acid, and binderless fiberboards. The nanomaterials are produced by oxalic acid hydrolysis of unwashed ground hemp hurd to produce thermally resistant nanomaterials in two output streams separated by centrifugation. The colloidal supernatant from nanomaterial production is concentrated and dried by spray-freeze drying before inclusion in melt-processed PA-6 nanocomposites, which are tested for their mechanical properties. Binderless boards are produced by fluidized grinding of hemp hurd in a mass colloider followed by filtration and hot pressing in enclosed press molds. These boards are then tested for their material properties and compared to ANSI Basic Hardboard standards. The hydrolysate left over after nanomaterial production is combined with filtrate from the binderless board grinding process and a fermentation is conducted with Lactiplantibacillus plantarum to study productivity of lactic acid caused by introduction of hydrolysate to media. The results from these three sets of experiments are used to inform a mass balance and gross profit analysis on the integrated process concept proposed. A valorization factor of >7.4 is reported, based on a 1000 kg/day pilot-scale process. This finds daily gross profit between $3490-$8900, when only the input costs and output wholesale values of products are considered. The M1250 binderless fiberboard produced exceeded ANSI standards for type 1 hardboard. Nanocomposites of PA-6 with 1% loading showed a 21 ±2% increase in ultimate tensile strength, and a 71 ±1% increase in elastic modulus compared to the neat PA-6.

Text

2024-04-29

Attribution-NonCommercial-NoDerivatives 4.0 International

http://hdl.handle.net/2429/88079

Chemical and Biological Engineering

University of British Columbia

UBCV

http://creativecommons.org/licenses/by-nc-nd/4.0/