UBC Theses and Dissertations
Performance of cross-laminated timber shear walls for platform construction under lateral loading Shahnewaz, Md
Cross-laminated timber (CLT) is gaining popularity in residential and non-residential applications in the North American construction market. CLT is very effective in resisting lateral forces resulting from wind and seismic loads. This research investigated the in-plane performance of CLT shear wall for platform-type buildings under lateral loading. Analytical models were proposed to estimate the in-plane stiffness of CLT wall panels with openings based on experimental and numerical investigations. The models estimate the in-plane stiffness under consideration of panel thickness, aspect ratios, and size and location of the openings. A sensitivity analysis was conducted to reduce the number of model parameters to those that have a significant impact on the stiffness reduction of CLT wall panels with openings. Finite element models of CLT wall connections were developed and calibrated against experimental tests. The results were incorporated into models of CLT single and coupled shear walls. Finite element analyses were conducted on CLT shear walls and the results in terms of peak displacements, peak loads and energy dissipation were in good agreement when compared against full-scale shear wall tests. A parametric study on single and coupled CLT shear walls was conducted with variation of number and type of connectors. The seismic performance of 56-single and 40-coupled CLT shear walls’ assembles for platform-type construction were evaluated. Deflection formulas were proposed for both single and coupled CLT shear walls loaded laterally in-plane that in addition to the contributions of CLT panels and connections, also account for the influence of adjacent perpendicular walls and floors above and illustrated with examples. Analytical equations were proposed to calculate the resistance of CLT shear walls accounting for the kinematic behaviour of the walls observed in experimental investigations (sliding, rocking and combined sliding-rocking) and illustrated with examples. Different configurations (number and location of hold-downs) of single and coupled CLT walls were considered. The findings presented in this thesis will contribute to the scientific body of knowledge and furthermore will be a useful tool for practitioners for the successful seismic design of CLT platform buildings in-line with the current CSA O86 provisions.
Item Citations and Data
Attribution-NonCommercial-NoDerivatives 4.0 International