"Science, Faculty of"@en .
"Physics and Astronomy, Department of"@en .
"DSpace"@en .
"UBCV"@en .
"Shaghaghi, Mehran"@en .
"2007-11-30T16:08:56Z"@en .
"2007"@en .
"Master of Science - MSc"@en .
"University of British Columbia"@en .
"In this thesis I address two different topics in quantum theory. The first one is the long discussed Schrodinger's cat problem, and the issues related to having a macroscopic superposition state. I show that the quantum theory provides full explanation to the problem. In the second part, I discuss the time measurement related issues in quantum mechanics. Since there does not exist any time operator in quantum mechanics generally, time is not directly measurable. Therefore we should devise other methods to register time. We study different time-energy relations and will find that accurate clocks have high energy uncertainties. If we use accurate clocks in quantum systems to observe their time evolutions, their high energy uncertainties interfere with system's normal evolution and slows it down. I also provide a formal proof to a previously suggested limiting accuracy relation on the measurements of the time-of-arrival experiments."@en .
"https://circle.library.ubc.ca/rest/handle/2429/204?expand=metadata"@en .
"964668 bytes"@en .
"application/pdf"@en .
"Topics in Quantum Physics Schrodinger's Cat Problem - Time Measurement Accuracies in Quantum Mechanics by Mehran Shaghaghi B.Sc., Shahid Beheshti University, 2003 A THESIS SUBMITTED IN PARTIAL FULFILMENT OF THE REQUIREMENTS FOR THE DEGREE OF Master of Science in The Faculty of Graduate Studies (Physics) The University Of British Columbia November, 2007 c\u00C2\u00A9 Mehran Shaghaghi 2007 Abstract In this thesis I address two different topics in quantum theory. The first one is the long discussed Schrodinger's cat problem, and the issues related to having a macroscopic superposition state. I show that the quantum theory provides full explanation to the problem. In the second part, I discuss the time measurement related issues in quantum mechanics. Since there does not exist any time operator in quantum mechanics generally, time is not directly measurable. Therefore we should devise other methods to register time. We study different time-energy relations and will find that accurate clocks have high energy uncertainties. If we use accurate clocks in quantum systems to observe their time evolutions, their high energy uncertainties interfere with system's normal evolution and slows it down. I also provide a formal proof to a previously suggested limiting accuracy relation on the measurements of the time-of-arrival experiments. ii Table of Contents Abstract . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Dedication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii I Schrodinger's cat, finally dead or alive? 1 1 Stating the Problem . . . . . . . . . . . . . . . . . . . . . . 2 2 Quantum Mechanical Approach. . . . . . . . . . . . . . 4 3 A Cat in the Cat-State . . . . . . . . . . . . . . . . . . . . 7 3.1 Equal Number of Possible Dead and Alive States Case . . . . 9 3.2 Unequal Number of Possible Dead and Alive States Case . . 13 4 When did the cat die? . . . . . . . . . . . . . . . . . . . . . 16 5 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 II Time Measurement Accuracies in Quantum Me- chanics 20 6 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 iii Table of Contents 7 Time Operators . . . . . . . . . . . . . . . . . . . . . . . . . . 23 7.1 Time Operators . . . . . . . . . . . . . . . . . . . . . . . . . 23 7.2 Time-of-Arrival Operators: . . . . . . . . . . . . . . . . . . . 24 8 Time-Energy Relations . . . . . . . . . . . . . . . . . . . . 27 8.1 Inaccuracies Versus Uncertainties . . . . . . . . . . . . . . . 27 8.2 Different Time-Energy Relation Derivations in Quantum Me- chanics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 8.2.1 Spread of the Wave Packet . . . . . . . . . . . . . . . 29 8.2.2 Reducing to Position-Momentum Relation . . . . . . 30 8.2.3 Variability Time . . . . . . . . . . . . . . . . . . . . . 31 8.2.4 Wigner Derivation . . . . . . . . . . . . . . . . . . . . 31 8.2.5 Geometric Method . . . . . . . . . . . . . . . . . . . . 32 8.2.6 Orthogonality Time . . . . . . . . . . . . . . . . . . . 33 8.3 Time-Energy Relations Comparison . . . . . . . . . . . . . . 35 9 Quantum Time Measuring Devices . . . . . . . . . . . . 37 9.1 Quantum Models for Clocks . . . . . . . . . . . . . . . . . . 37 9.1.1 Linear Clocks . . . . . . . . . . . . . . . . . . . . . . 38 9.1.2 Periodic Clocks . . . . . . . . . . . . . . . . . . . . . 39 9.2 General Properties of Quantum Clocks . . . . . . . . . . . . 43 9.2.1 Clock's Resolution . . . . . . . . . . . . . . . . . . . 43 9.2.2 Clock's Energy . . . . . . . . . . . . . . . . . . . . . . 43 9.2.3 A \u0010Time\u0011-Energy Relation . . . . . . . . . . . . . . . 44 9.2.4 Other Fundamental Limitations on Quantum Clocks . 46 10 Quantum Time Measurements . . . . . . . . . . . . . . . 47 10.1 Measuring With a Clock . . . . . . . . . . . . . . . . . . . . 47 10.2 A Toy Model: Spin System Coupled to a Linear Clock . . . . 48 11 Measurement of the Time-of-Arrival . . . . . . . . . . 55 11.1 Oppenheim et al. Approach to the Time-of-Arrival Problem 56 11.2 General Limitation on Time-of-Arrival Measurements . . . . 57 11.3 Stating the Time-of-Arrival Inaccuracy Relation . . . . . . . 60 iv Table of Contents 11.4 Inaccuracy in the Time-of-Arrival Measurement, a General Feature of Quantum Physics? . . . . . . . . . . . . . . . . . 61 12 Applications and Examples . . . . . . . . . . . . . . . . . 63 12.1 Quantum Zeno Effect . . . . . . . . . . . . . . . . . . . . . . 63 12.2 Bohr-Einstein Debate, the Einstein Box . . . . . . . . . . . . 64 13 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Appendices A Expectation Value and. . . . . . . . . . . . . . . . . . . . . 70 B Geometrical Method. . . . . . . . . . . . . . . . . . . . . . 72 C Fundamental Limitations on Quantum Clocks . . . 75 v List of Figures 9.1 Periodic clock's time reading probability for the case of N=12. 41 9.2 Uncertainty in time measurement4t for the caseN = 2j+1 = 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 10.1 Exact form of the \u0010normalized\u0011 expectation value of the mea- sured time by a linear clock. . . . . . . . . . . . . . . . . . . . 52 10.2 Case p0 = 0.1a . . . . . . . . . . . . . . . . . . . . . . . . . . 53 10.3 Case p0 = a . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 10.4 Case p0 = 10a . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 10.5 Case p0 = 50a . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 11.1 Clock's Induced Step Potential . . . . . . . . . . . . . . . . . 58 11.2 Clock Coupled to the System with Negative Coupling Coefficient 59 12.1 Einstein box thought experiment of 1930 as designed by Bohr. 64 vi Acknowledgements Many people have helped me directly or indirectly through this work. I would like to mention a few to keep the tradition of gratitude alive. Most significant of them is my thesis advisor, Bill Unruh, who was the first to welcome me as a prospective student. While I will be forever in debt to his scientific guidance, his physical intuition and his trust through these years. He has provided me much room for exploring my own ideas, while providing me with valuable guidance through this work. I learnt a lot directly and indirectly from him. I would like to thank Mr. Afshin Daneshnejad and Dr. Mohamamd Sepehry-Rad, who introduced me the joy of theoretical physics. This thesis could not be in the present form without the help, useful discussion and comments of my dear friends: Alfredo Franco-Cea, Ali Reza Mohazab, Toyono Takasugi, Susan Kaboly-Zadeh and Yuichi Amitani. Throughout my work, I have had the benefit of discussions with Saint John's College residents while being a member of its community since 2004. vii Dedication To my father, my first science teacher, who encouraged my curiosity by giving me gifts like magnets and magnifying glasses to play. His continual support and encouragements during my career has been essential to fulfil my dreams. viii Dedication \u0010Everything should be made as simple as possible but not simpler.\u0011 -Albert Einstein ix Part I Schrodinger's cat, finally dead or alive? 1 Chapter 1 Stating the Problem In his 1935 paper [1], Schrodinger has a brief paragraph describing a cat to show a seemingly conceptual problem in quantum mechanics; he discusses and rejects the interpretation that a quantum system is physically some how spread on different parts of a superposition. He emphasizes as follows: \"One can even set up quite ridiculous cases. A cat is penned up in a steel chamber, along with the following diabolical device (which must be secured against direct interference by the cat): in a Geiger counter there is a tiny bit of radioactive substance, so small that perhaps in the course of one hour one of the atoms de- cays, but also, with equal probability, perhaps none; if it happens, the counter tube discharges and through a relay releases a ham- mer which shatters a small flask of hydrocyanic acid. If one has left this entire system to itself for an hour, one would say that the cat still lives if meanwhile no atom has decayed. The first atomic decay would have poisoned it. The Psi function for the entire system would express this by having in it the living and the dead cat (pardon the expression) mixed or smeared out in equal parts. It is typical of these cases that an indeterminacy originally restricted to the atomic domain becomes transformed into macro- scopic indeterminacy, which can then be resolved by direct obser- vation. That prevents us from so naively accepting as valid a \"blurred model\" for representing reality. In itself it would not embody anything unclear or contradictory. There is a difference between a shaky or out-of-focus photograph and a snapshot of 2 Chapter 1. Stating the Problem clouds and fog banks.\" This thought experiment has raised many controversial arguments, some times referred as the cat paradox. The Schrodinger dilemma consists of different part, often mixed care- lessly: \u00E2\u0080\u00A2 what is the state of the cat in the box? \u00E2\u0080\u00A2 Can quantum mechanics provide a full description of the system? \u00E2\u0080\u00A2 When the state of the cat change? [when did the cat die?] \u00E2\u0080\u00A2 Can we have macroscopic system being in superposition of states? [do we have classical cat-state?] Each of the questions above should be regarded separately as they refer to different aspects of the problem, not necessarily on equal footing. We know (at least most of us believe) that the cat in the box is either dead, alive or dying and not in a smeared out state between those alterna- tives, so is it something missing in order to have a valid quantum mechanical description of the system? Is it that quantum mechanics is incomplete and lacks rules relating the classical and quantal descriptions? Does quantum mechanics have the ability to describe the macroscopic world as good as the microscopic world? In this Part we first provide the standard quantum mechanical descrip- tion of the Schrodinger cat's system, and try to answer the above posed questions. In the next chapter, as an example of a macroscopic system being in superposition state, we study a cat in the cat-state1. Then we try to elaborate on the obstacles preventing us from observing such a state. 1We follow the common conventional term, calling an equal superposition state of all being in two orthogonal states |0\u00E3\u0080\u0089 and |1\u00E3\u0080\u0089 a cat-state. 3 Chapter 2 Standard Quantum Mechanical Approach Towards the Schrodinger's Cat It is instructive to present the standard quantum mechanical approach of the Schrodinger's cat problem and try to find potential problematic parts in it. First of all let's make some simplifications to the problem, making it \u0010as simple as possible, however not simpler \u0011. In our modified problem, instead of the sophisticated Schrodinger setup to kill the cat, our system is composed of a half reflecting mirror and a photon detector behind it which instantly triggers a laser gun if detects a photon. The laser gun is aimed on an ant, which is held steady under a transparent tape strip; so the laser beam would kill the ant instantly. The experiment starts by putting an alive ant under the strip onto the specified location into the box with a window which we put the half reflecting mirror there. Sending a single photon toward the window, we investigate the state of the ant. There is a clear analogy between our simple system and Schrodinger's setting. But ours is easier to investigate. Lets define the states in our subsystems in the box. In the photon sub- system [system I], |R\u00E3\u0080\u0089 represents the state of the reflected photon, while |T \u00E3\u0080\u0089 is the transmitted one; in the ant subsystem [system II], |d\u00E3\u0080\u0089 represents the 4 Chapter 2. Quantum Mechanical Approach. . . dead ant and |l\u00E3\u0080\u0089 the alive ant2. The state of the photon after entering the box and meeting the half- mirror is |R\u00E3\u0080\u0089+|T \u00E3\u0080\u0089\u00E2\u0088\u009A 2 , and after the time t0 = D/c (D is the distance of the ant from the initial photon emitter , so t0 is the time that a photon needs to reach the ant) the state of the ant-photon system is |Rl\u00E3\u0080\u0089+|Td\u00E3\u0080\u0089\u00E2\u0088\u009A 2 , where we write |Mn\u00E3\u0080\u0089 instead of |M\u00E3\u0080\u0089I \u00E2\u008A\u0097|n\u00E3\u0080\u0089II for brevity. Thus the interaction correlates the ant and photon subsystems and makes the state of the whole system an entangled state. The interaction between subsystems is reversible, as far as we do not separate them. Thus the state vector of the system changes according to |Photon\u00E3\u0080\u0089I \u00E2\u008A\u0095 |l\u00E3\u0080\u0089II 7\u00E2\u0088\u0092\u00E2\u0086\u0092 ( |R\u00E3\u0080\u0089+ |T \u00E3\u0080\u0089\u00E2\u0088\u009A 2 ) I \u00E2\u008A\u0095 |l\u00E3\u0080\u0089II 7\u00E2\u0088\u0092\u00E2\u0086\u0092 |Rl\u00E3\u0080\u0089+ |Td\u00E3\u0080\u0089\u00E2\u0088\u009A 2 , while system's state operator changes as[ 1 2 1 2 1 2 1 2 ] I \u00E2\u008A\u0095 [ 1 0 0 0 ] II 7\u00E2\u0088\u0092\u00E2\u0086\u0092 [ 1 2 |l\u00E3\u0080\u0089 \u00E3\u0080\u0088l| 12 |l\u00E3\u0080\u0089 \u00E3\u0080\u0088d| 1 2 |d\u00E3\u0080\u0089 \u00E3\u0080\u0088l| 12 |d\u00E3\u0080\u0089 \u00E3\u0080\u0088d| ] I = [ 1 2 |R\u00E3\u0080\u0089 \u00E3\u0080\u0088R| 12 |R\u00E3\u0080\u0089 \u00E3\u0080\u0088T | 1 2 |T \u00E3\u0080\u0089 \u00E3\u0080\u0088R| 12 |T \u00E3\u0080\u0089 \u00E3\u0080\u0088T | ] II = \u00EF\u00A3\u00AE\u00EF\u00A3\u00AF\u00EF\u00A3\u00AF\u00EF\u00A3\u00AF\u00EF\u00A3\u00AF\u00EF\u00A3\u00B0 1 2 0 0 1 2 0 0 0 0 0 0 0 0 1 2 0 0 1 2 \u00EF\u00A3\u00B9\u00EF\u00A3\u00BA\u00EF\u00A3\u00BA\u00EF\u00A3\u00BA\u00EF\u00A3\u00BA\u00EF\u00A3\u00BB I\u00E2\u008A\u0097II A tricky part is that we must look at the system as a whole when we talk about the entanglement and the coherent states; the individual subsystems of the ant or the photon are not in superposition states as we shall show. There exists no experiment on the ant alone which would be sensitive to the superposition. The common mistake seems to be to think (implicitly) that the system's state vector |Rl\u00E3\u0080\u0089+|Td\u00E3\u0080\u0089\u00E2\u0088\u009A 2 is composed of something like |R\u00E3\u0080\u0089+|T \u00E3\u0080\u0089\u00E2\u0088\u009A 2 \u00E2\u008A\u0097 |l\u00E3\u0080\u0089+|d\u00E3\u0080\u0089\u00E2\u0088\u009A 2 or |R\u00E3\u0080\u0089+|T \u00E3\u0080\u0089\u00E2\u0088\u009A 2 \u00E2\u008A\u0095 |l\u00E3\u0080\u0089+|d\u00E3\u0080\u0089\u00E2\u0088\u009A 2 . This seems implicit in Schrodinger's description. A superposition state like |\u00CF\u0086\u00E3\u0080\u0089 = |0\u00E3\u0080\u0089+|1\u00E3\u0080\u0089\u00E2\u0088\u009A 2 has a coherent density matrix in 2As we will discuss in the next chapter, describing an ant by a two dimensional state is not quite true. However that subject does not matter at this part and the basic argument remains intact. 5 Chapter 2. Quantum Mechanical Approach. . . the form of |\u00CF\u0086\u00E3\u0080\u0089 \u00E3\u0080\u0088\u00CF\u0086| = [ 1 2 1 2 1 2 1 2 ] , whereas the state operator of the ant or the photon subsystem in the box, which can be constructed by tracing out the irrelevant components of the total state operator, are both of the form of \u00CF\u0081 = [ 1 2 0 0 12 ] . This state operator represents a non-coherent state. In other words, looking at sole the ant subsystem, the ant state is either alive or dead, but not alive and dead at the same time (the paradoxical issue in the Schrodinger's problem), since the off diagonal components of the state operator are zero. The same is true for the sole photon subsystem. These state operators of the sole ant or photon subsystems do not change any more by coupling to them any extra systems such as a registrar or Wigner's friend [2]. The state operators of the subsystem I changes according to[ 1 2 1 2 1 2 1 2 ] I 7\u00E2\u0088\u0092\u00E2\u0086\u0092 [ 1 2 0 0 12 ] I and the subsystem II changes like[ 1 0 0 0 ] II 7\u00E2\u0088\u0092\u00E2\u0086\u0092 [ 1 2 0 0 12 ] II When these subsystems are looked at individually, the changes to these states are irreversible. Thus the individual subsystems are not in superposition states; theoreti- cally they appear to be in only one of the two possible states, as we get them experimentally; not in both at the same time. i.e. there exists no experi- ment which could be performed on the subsystem which could differentiate the ant's state from a classical mixture. 6 Chapter 3 A Cat in the Cat-State Now lets take our attention to the question of possibility of having a clas- sical cat in an alive-dead cat-state. Recall that a part of discussion on the Schrodinger's cat problem has been on the existence of a macroscopic super- position state. Here we study a cat in an alive-dead superposition, regardless of the fact that the Schrodinger's cat is not in the cat-state itself, as we dis- cussed before. Choosing a fairly realistic model for the cat, we show different behaviours of a macroscopic system, for example a cat in the cat-state, as compared to the behaviour of a structure-less quantum particle, like an electron, in a cat-state. In what follows we show the inability to see any positive exper- imental result from the possible setups wishing to detect the interference between two components of a classical cat-state. As we will show there is no contradictions between the theoretical results and the observations. Thus a quantum mechanical approach can tackle the question in a philosophically correct way. Looking at a cat or any other living entity, it is clear that when we talk it \u0010living\u0011, we mean that its organs are working in a proper way. For example the cat's heart beats, its nerves transmit electrical signals, its respiratory sys- tem works, the pupils respond to light, etc... Accordingly when we consider the cat \u0010dead\u0011 we mean that some of these features are not present. Bearing in mind these complexities, we question representing the living cat and the dead cat by states as simple as |1\u00E3\u0080\u0089 = ( 1 0 ) and |0\u00E3\u0080\u0089 = ( 0 1 ) states. We can expect that this simplification -representing an alive and a dead cat by simple |1\u00E3\u0080\u0089 and |0\u00E3\u0080\u0089 states- as naive as representing the spin direction of a structure-less particle such as an electron, might finally yield 7 Chapter 3. A Cat in the Cat-State to some counter intuitive results. As a hint to see aforementioned representation inefficiency, let's consider the operator O\u00CC\u0082 = |SchrCat\u00E3\u0080\u0089 \u00E3\u0080\u0088SchrCat| = ( |live\u00E3\u0080\u0089+ |dead\u00E3\u0080\u0089\u00E2\u0088\u009A 2 )(\u00E3\u0080\u0088live|+ \u00E3\u0080\u0088dead|\u00E2\u0088\u009A 2 ) (3.1) = 1 2 (|1\u00E3\u0080\u0089+ |0\u00E3\u0080\u0089) (\u00E3\u0080\u00881|+ \u00E3\u0080\u00880|) = [ 1 2 1 2 1 2 1 2 ] Measurements with that operator on a population of dead cats brings 50% of them back to life theoretically. This is something absurd and has never been reported in our daily life. Death has always been a one way road that can not be reversed simply, at least not as successfully as the theory predicts in the above. This implies that those 2 dimensional states can not ideally represent a cat state. An alive or dead cat is a complex system and we should choose a decent representation to describe it. There are certain attributes which are specific to aliveness of any living creature, and if any of them changed the being would not be considered alive anymore. These attributes are generally called vital signs in biological sciences; so say, the hand position is not of those attributes, while the working of the nerves is an attribute for the live body. We can define vital states as the states which upon change, bring about a change in the living state of the being to dead3. All the other states - non vital ones- can be considered as environmental states for life situation of the individual. In this definition we consider the transition between life and death instantaneous, to avoid the possible complexities. Physiologically, however, the death is considered as a process in the body that besides the measurements and observations, should be monitored to be assessed. If we consider the scale of a living body and the number of different organs and matched vital signs we notice there is a large number of different life states all representing an alive cat; furthermore there are numerous other 3or in a more conservative notion, aliveness of the being would be questionable. 8 Chapter 3. A Cat in the Cat-State states all representing a dead cat. 3.1 Equal Number of Possible Dead and Alive States Case Let's for now suppose that the Hilbert spaces of the life states and the death states are at same dimensions, in other words suppose there is the same number of ways for the cat to be alive or to be dead. We can define an operator Z with eigenvalues 1 and 0 for live or dead cat and write |livei\u00E3\u0080\u0089 as the basis for the live states and |deadi\u00E3\u0080\u0089 as a basis for the dead state. Consider the unitary and Hermitian operators X |livei\u00E3\u0080\u0089 = |deadi\u00E3\u0080\u0089 X |deadi\u00E3\u0080\u0089 = |livei\u00E3\u0080\u0089 Z |livei\u00E3\u0080\u0089 = |livei\u00E3\u0080\u0089 Z |deadi\u00E3\u0080\u0089 = \u00E2\u0088\u0092 |deadi\u00E3\u0080\u0089 Y |livei\u00E3\u0080\u0089 = i |deadi\u00E3\u0080\u0089 Y |deadi\u00E3\u0080\u0089 = \u00E2\u0088\u0092i |livei\u00E3\u0080\u0089 These X,Y, Z form a \u00102-level\u0011 subsystem of the full Hilbert space, and we can map the full Hilbert space onto the space spanned by the direct product of a two level system {|1\u00E3\u0080\u0089 , |0\u00E3\u0080\u0089} and a space of \u0010irrelevant\u0011 attributes |\u00CF\u0086i\u00E3\u0080\u0089 of dimension half of the dimensionality of the full Hilbert space where |1\u00E3\u0080\u0089 \u00E2\u008A\u0097 |\u00CF\u0086i\u00E3\u0080\u0089 = |livei\u00E3\u0080\u0089 and |0\u00E3\u0080\u0089\u00E2\u008A\u0097|\u00CF\u0086i\u00E3\u0080\u0089 = |deadi\u00E3\u0080\u0089. Note that this decomposition depends on the arbitrary choice of the basis |livei\u00E3\u0080\u0089 and |deadi\u00E3\u0080\u0089. Thus the total 2m dimensional Hilbert space of the dead plus alive states can be decomposed to two smaller sub-spaces, a 2 dimensional Hilbert space which shows the \u0010life state\u0011 of the cat, and a m dimensional Hilbert space representing the details of each dead or alive states Htot = H2\u00C3\u00972 \u00E2\u008A\u0097Hm\u00C3\u0097m . In this space we can categorize unitary transformations under three types: 1. Type I, which map live states to live states and dead states to dead 9 Chapter 3. A Cat in the Cat-State states: UT (t) = [ Ul(t) 0 0 Ud(t) ] with the condition Ul(t)U \u00E2\u0080\u00A0 l (t) = Ud(t)U \u00E2\u0080\u00A0 d(t) = Im or UT (t)U \u00E2\u0080\u00A0 T (t) = I2m where In is the n-dimensional unit matrix. We call these unitary op- erators time evolution operators. 2. Type II, which map live states to dead states and dead states to live ones: UL(t) = [ 0 Ur(t) Uk(t) 0 ] with the condition Ur(t)U \u00E2\u0080\u00A0r (t) = Uk(t)U \u00E2\u0080\u00A0 k(t) = Im or UL(t)U \u00E2\u0080\u00A0 L(t) = I2m Killing of the cat is caused by the action of such a unitary operator; we call these unitary operators life-state changing operators. 3. Type III unitary operators are those which can not be categorized under those previous types. Such operators mix the live and the dead states and make a state which is a mixture of alive and dead states; we call these operators life-transient operators. To do a successful interference experiment on the Schrodinger cat we should choose our Hermitian operator in a way so as to maximize the chance to see the interference between the live and the dead parts of the Schrodinger cat wave function. 10 Chapter 3. A Cat in the Cat-State The best option would be to have an operator which map the live state part of the Schrodinger cat completely onto its dead state part; however, we do not know the exact configuration of the dead state and alive state parts per se. This is because we do not know the form of time evolution operators which operate on the dead Hilbert space and the alive one. That is the exact form of the time evolution operators |L0\u00E3\u0080\u0089 UL(t)7\u00E2\u0088\u0092\u00E2\u0086\u0092 |Lt\u00E3\u0080\u0089 and |D0\u00E3\u0080\u0089 UD(t)7\u00E2\u0088\u0092\u00E2\u0086\u0092 |Dt\u00E3\u0080\u0089. Bearing in mind the above mentioned problem in choosing operator to do the interference experiment, lets try this handy operator which projects the dead states to the alive ones and vice versa, without changing their distributions: \u00E2\u0084\u00A6\u00CC\u0082 |livei\u00E3\u0080\u0089 = \u00E2\u0084\u00A6\u00CC\u0082 [|1\u00E3\u0080\u0089 \u00E2\u008A\u0097 |\u00CF\u0086i\u00E3\u0080\u0089] = |0\u00E3\u0080\u0089 \u00E2\u008A\u0097 |\u00CF\u0086i\u00E3\u0080\u0089 = |deadi\u00E3\u0080\u0089 and \u00E2\u0084\u00A6\u00CC\u0082 |deadi\u00E3\u0080\u0089 = \u00E2\u0084\u00A6\u00CC\u0082 [|0\u00E3\u0080\u0089 \u00E2\u008A\u0097 |\u00CF\u0086i\u00E3\u0080\u0089] = |1\u00E3\u0080\u0089 \u00E2\u008A\u0097 |\u00CF\u0086i\u00E3\u0080\u0089 = |livei\u00E3\u0080\u0089 or in the other representation \u00E2\u0084\u00A6\u00CC\u0082 = [ 0 Im Im 0 ] , where Im is the m \u00C3\u0097 m unit matrix; we can always choose a representation to have our operator look like that. We do the interference experiment on our Schrodinger cat (in the Schrodinger picture of quantum mechanics): |SchrCat(t)\u00E3\u0080\u0089 = |live\u00E3\u0080\u0089+ |dead\u00E3\u0080\u0089\u00E2\u0088\u009A 2 = (|1\u00E3\u0080\u0089 \u00E2\u008A\u0097 |L(t)\u00E3\u0080\u0089) + (|0\u00E3\u0080\u0089 \u00E2\u008A\u0097 |D(t)\u00E3\u0080\u0089)\u00E2\u0088\u009A 2 = (\u00E2\u0088\u0091 i ai(t) |1\u00E3\u0080\u0089 \u00E2\u008A\u0097 |\u00CF\u0086i\u00E3\u0080\u0089 ) + \u00EF\u00A3\u00AB\u00EF\u00A3\u00AD\u00E2\u0088\u0091 j bj(t) |0\u00E3\u0080\u0089 \u00E2\u008A\u0097 |\u00CF\u0086j\u00E3\u0080\u0089 \u00EF\u00A3\u00B6\u00EF\u00A3\u00B8 \u00E2\u0088\u009A 2 with the normalization \u00E2\u0088\u0091 i |ai(t)|2 = \u00E2\u0088\u0091 j |bj(t)|2 = 1 11 Chapter 3. A Cat in the Cat-State We get \u00E3\u0080\u0088Schrcat(t)| \u00E2\u0084\u00A6\u00CC\u0082 |Schrcat(t)\u00E3\u0080\u0089 = 1 2 (\u00E2\u0088\u0091 i ai(t)bi(t) + ai(t)bi(t) ) = Re \u00E3\u0080\u0088L(t)|D(t)\u00E3\u0080\u0089 . Since at an arbitrary time |L(t)\u00E3\u0080\u0089 and |D(t)\u00E3\u0080\u0089 are not known for us and can be any of m orthogonal states in the alive and dead Hilbert spaces, we evaluate the mean value of above quantity statistically. This value is zero in all complex vector spaces. This yields to the expectation value of \u00E3\u0080\u0088Schrcat(t)| \u00E2\u0084\u00A6\u00CC\u0082 |Schrcat(t)\u00E3\u0080\u0089 = Re \u00E3\u0080\u0088L(t)|D(t)\u00E3\u0080\u0089 = 0 with the standard deviation4 of \u00CF\u0083 \u00E2\u0088\u009D 1\u00E2\u0088\u009A m . Thus statistically, the expectation value of our interference experiment would be zero, and the chance to see the interference falls to zero in practise. However, if we could have conducted an experiment right after the time when the cat changes its state from the alive state to the Schrodinger cat- state5, using UL(0) operator -the life-state changing operator which acts at t = 0 and kills the cat- then (in the Heisenberg picture of quantum mechanics) we get: \u00E3\u0080\u0088SchrCat(0)|UL(0) |SchrCat(0)\u00E3\u0080\u0089 = = (\u00E3\u0080\u0088L(0)|+\u00E3\u0080\u0088Uk(0)L(0)|)UL(0)(|L(0)\u00E3\u0080\u0089+|Uk(0)L(0)\u00E3\u0080\u0089)2 = \u00E3\u0080\u0088L(0)|Ur(0)Uk(0)|L(0)\u00E3\u0080\u0089+\u00E3\u0080\u0088Uk(0)L(0)|Uk(0)L(0)\u00E3\u0080\u00892 = 1+\u00E3\u0080\u0088L(0)|Ur(0)Uk(0)|L(0)\u00E3\u0080\u00892 So it would be possible to observe the interference if we knew the exact time of transition. We should underline that the assumption which the live and the dead Hilbert spaces are at the same dimensions causes a weird situation though; if we kill a cat, killing it again by the same operation, will make it living! This is because we have UL(tn)UT (tn \u00E2\u0088\u0092 t0)UL(t0) = UT (t\u00CC\u0081), operating twice 4Details of calculation in Appendix A 5This is equivalent of knowing the exact configuration of the dead state and alive state parts of the cat at a point in time, in contrast to the previous choice of operator to do the interference experiment. 12 Chapter 3. A Cat in the Cat-State with any of type II unitary operators, life-state changing operators, is equal to action of a type I unitary operator, time evolution operators. 3.2 Unequal Number of Possible Dead and Alive States Case Let us now consider unequal dimensional dead and live Hilbert spaces. In particular let us assume that the dead states span a much bigger Hilbert space than the life states do. We defined vital states as the states which upon change, bring about a change in the living state of the being to dead. So for the total number of q vital states, we have at least 2q \u00E2\u0088\u0092 1 dead states versus any live state6. Therefore the dead state Hilbert spaces is much bigger than the live state Hilbert space. Recall also that in the real life we might amputate any part of a dead body creating another dead states, not changing its life situation, while in doing so to an alive body we do not have such freedom. In the world where the dead states span much greater Hilbert space than the live states, observing the interference is even harder. In this case, since the dimensions of the live and the dead states are not equal, it is not possible to construct a well behaviour Hermitian operator like \u00E2\u0084\u00A6\u00CC\u0082 to do the interference experiment. Also since we do not know the exact configuration of the live and dead parts of the Schrodinger cat state and their time development here as well, a randomly chosen operator like A\u00CC\u0082 = |\u00CF\u0088\u00E3\u0080\u0089 \u00E3\u0080\u0088\u00CF\u0086|+ |\u00CF\u0086\u00E3\u0080\u0089 \u00E3\u0080\u0088\u00CF\u0088| again yield to the expectation values of zero with the standard deviation of the order of \u00CF\u0083 \u00E2\u0088\u009D 1Q , (Q = 2q). Lets in this case try the first operator O\u00CC\u0082 (3.1) and see what its success rate is to bring the dead cats back to life. O\u00CC\u0082 = |SchrCat\u00E3\u0080\u0089 \u00E3\u0080\u0088SchrCat| = 1\u00E2\u0088\u009A 2 (|live\u00E3\u0080\u0089+ |dead\u00E3\u0080\u0089) . 1\u00E2\u0088\u009A 2 (\u00E3\u0080\u0088live|+ \u00E3\u0080\u0088dead|) 6Having q different vital states only one configuration out of 2q possible configurations have all the vital states available. 13 Chapter 3. A Cat in the Cat-State = 1 2 [ |L(t)\u00E3\u0080\u0089 \u00E3\u0080\u0088L(t)| |L(t)\u00E3\u0080\u0089 \u00E3\u0080\u0088D(t)| |D(t)\u00E3\u0080\u0089 \u00E3\u0080\u0088L(t)| |D(t)\u00E3\u0080\u0089 \u00E3\u0080\u0088D(t)| ] with the states7 |L(t)\u00E3\u0080\u0089 = n\u00E2\u0088\u0091 i ai(t) |li\u00E3\u0080\u0089 and |D(t)\u00E3\u0080\u0089 = m\u00E2\u0088\u0091 j b(t) |dj\u00E3\u0080\u0089 and the nor- malization n\u00E2\u0088\u0091 i |ai(t)|2 = m\u00E2\u0088\u0091 j |bj(t)|2 = 1 This operator brings a dead state, \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3D\u00CC\u0081(t)\u00E2\u008C\u00AA, back to life, the live state, |L(t)\u00E3\u0080\u0089, with the success chance of 12 \u00E2\u008C\u00A9 D(t)|D\u00CC\u0081(t) \u00E2\u008C\u00AA which is of the order of8 1\u00E2\u0088\u009A m in average, while bringing a live state, \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3L\u00CC\u0081(t)\u00E2\u008C\u00AA, to death with the success chance of 12 \u00E2\u008C\u00A9 L(t)|L\u00CC\u0081(t) \u00E2\u008C\u00AA which goes as \u00E2\u0088\u00BC= 1\u00E2\u0088\u009An in average9. Considering that n \u00C2\u00BF m [according to our assumptions mn \u00E2\u0089\u00A5 2q \u00E2\u0088\u0092 1, where we have q number of vital states] these results agree with our daily observation that killing is much easier than the resurrecting a dead body. Also we should emphasize that if we knew the state of a dead body, \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3D\u00CC\u0081(t)\u00E2\u008C\u00AA, per se, we would be able to construct an operator to bring it back to life with a high success rate. Similar operations happen commonly in hospitals; for example, when physicians find the cause of death is just non-beating heart, they try to bring the patient back to life by executing electric shocks, before the passage of time changes that dead state to another unknown state for 7Here note that |L(t)\u00E3\u0080\u0089 and |D(t)\u00E3\u0080\u0089 are n and m dimensional states respectively, while|live\u00E3\u0080\u0089 and |dead\u00E3\u0080\u0089 are of m+ n dimensions both. 8Details of calculation in Appendix A 9If someone insists on representing the projection operator O\u00CC\u0082 in 2 \u00C3\u0097 2 basis [dead- alive components], ignoring the internal structure of the cat [or generally any macroscopic measuring device], s/he would end up with something like O\u00CC\u0082 = \" 1 2 1 2 \u00E2\u0088\u009A m 1 2 \u00E2\u0088\u009A m 1 2 # for our first assumption (equal the dead and the live Hilbert spaces) and O\u00CC\u0082 = \" 1 2 1 2 \u00E2\u0088\u009A m 1 2 \u00E2\u0088\u009A n 1 2 # for the second case, which both read O\u00CC\u0082 = \u00C5\u00AF 1 2 0 0 1 2 \u00C3\u00BF in the classical realm where m,n \u00C3\u0080 1. Note that this decoherence is caused solely because of our intrinsic ignorance about the internal state of the cat [classic measuring device in general] and is not dynamical. 14 Chapter 3. A Cat in the Cat-State them. So a critical fact which limits our ability to resurrect a deceased body is the evolution after the death. In the previous case of equal number of dead and alive states we encoun- tered the weird situation that killing the cat twice by the same operator resuscitates it. What if we shoot a cat twice in the head in this case? can we bring it back to life? Clearly now we are not able to make any type II unitary operators, which switches the dead states parts and the life states parts, as we did in the previous case, since the number of the live states and the dead states are not equal and we do not have the life-dead Hilbert space symmetry. In our present case any life-state changing operator that maps live states to dead states, can not map all the dead states to the live states. This is because the number of the dead states exceeds the number of the live ones. So, inevitably the majority of the dead states will map again on the dead states just with a new configuration. In the limit of n \u00C2\u00BF m the action of life-changing operators would look like mapping the live states to the dead states, while redistributing the dead states over the dead Hilbert space. Such behaviour is in accordance with our expectation for a killing operator. Thus by shooting twice a cat, we not only can not resuscitate it, but also we make its dead state configuration more unknown and messy. 15 Chapter 4 When did the cat die? So then what changes happen by opening the box and looking into it? This question and another question have been of most challenging questions of quantum mechanics interpretation since the introduction of the Schrodinger cat problem. The other question is \u0010When did the cat die?\u0011 or in our version of the Schrodinger cat problem \u0010when does the ant die?\u0011. In our simplified version of the notorious cat problem, it is easy to infer that if ever the ant dies that happens at the time t0 = D/c after we launch the photon towards the box. After this time nothing special happens to the subsystem, neither our looking nor the registrar can kill the ant then! The time of death of the ant never depends on when some one opens the box. Some may bring the question of the possibility of resuscitating the ant, or observing the interference after the time t0. According to our discussion in the previous chapter, it is not feasible in practise due to the macroscopic nature of the total system. But what then happens by opening the box and making an observation on the system? The point is that before observing the ant subsystem separately, practically we can not have absolute information about it. The best knowl- edge that we can acquire theoretically is that its state operator is [ 1 2 0 0 12 ] , and that means it is dead by 50% chance and alive by the same chance10. This information remains unchanged until we observe the ant subsystem in the box, or we talk to Wigner's friend. At that time our information may change. The configuration of the system does not change then though, the 10Having no definite information about the subsystems is clearly due to the setup; we have set the system to behave so. When we send a photon to interact with the half reflecting mirror and be reflected randomly by 50% chance, we should expect then to have no definite information about the subsystems after such interaction. 16 Chapter 4. When did the cat die? thing that changes is our ignorance about the subsystems. This is in harmony with the pragmatic view that no real identity is at- tributed to the wave function, and its significance is only due to the informa- tion that it makes extractable about the system through the mathematical machinery. 17 Chapter 5 Conclusion As we discussed in chapter 2, entangling a cat with a photon in the cat-state does not provide us with a cat in the cat-state. Thus the cat would not be in the simultaneous state of life and death. We see that by entangling the ant's life state with the photon's state in the cat-state, we lose some information about the ant's life state in the box. This is due to the fact that we do not have a proper defined rotated life- dead coordinate to describe the properties of the state of the ant subsystem; however, if for example the entanglement was between an electron in +X spin direction- instead of the initial incoming photon- and another electron initially in +Z direction- instead of an alive ant- interacting according to the Z component of the initial electron's spin, we were able to talk certainly about its final state properties of the spin of the \u0010ant\u0011 electron, which would resemble a spin in +X direction properties when we setup experiments to observe interference of the total state. Thus it seems we should look for obstacles which prevent us from having a large scale system11 well defined in a cat-state. In other words, why we are not able to simply redefine our coordinates to encompass the state of a classical cat-state as another conceptually well defined pure state. The arguments presented in section 3, suggest that for the Schrodinger's problem on life status of the cat, the complexities arise from our symmetric attribution to the asymmetric concepts of life and death. For a general classical system, these kinds of asymmetries are quite basic. In almost all the cases, among lots of different pure states that the macro- scopic system can go through, we commonly select few of them, specifically 11By the large scale [or interchangeably classical/macroscopic] system, we actually mean a system with a large Hilbert space state, not a system with a large quantum number. 18 Chapter 5. Conclusion those with lower entropy, and name them differently from the rest of other possible configurations. For example, consider a watch. There is a state [we call it the working clock state] which is distinguished in that some small changes to its components can prevent the clock from working. However, there are many rearrangement of the same components, which are not in- cluded in our definition of a working clock. All are called under a single name non-working clock state. Moreover, it is a falsity to count all of them as a single state. Making a cat-state out of clock's working and non-working states, arises similar results as we got for a cat. In this case, our careless definitions towards asymmetric concepts like life and death, can be extended to any classical objects. As shown in section 3.2, whereby such conditions seeking the entanglement is impossible12. In summary we showed that the Schrodinger's cat, in his experimental setup, is not in the cat-state itself, which is therefore not living and dead simultaneously. Also we showed that even if we could have a cat in the cat- state, practically it is impossible to get a positive result in an experimental setup whose goal is to see the interference between the components of the superposition of states of the cat. The result is general and is true for any other macroscopic object with unknown internal structure states. However, there is nothing preventing us from having a macroscopic system being in superposition of states, though not distinguishable from pure states for us in practise. 12Here we may introduce another type of decoherence, induced decoherence due to asymmetric definitions, see the footnote (9) 19 Part II Time Measurement Accuracies in Quantum Mechanics 20 Chapter 6 Introduction One of the first debates in quantum physics was the legality of attributing an element of reality to an unmeasurable quantity. The common pragmatic view is that a property can be assigned to a system only if it can be measured in principle. Physicists are generally interested to find whether there are fundamental limitations on their measurements in general, and whether those limitations have implications in some more fundamental theory. Time measurements in quantum theory, however, are special ones; there is no time operator. All the physical measurements are happening in time and we can not freeze an event in time to measure its time component. In classical physics there are no limitations on measurements of space or time in principle. While in quantum physics the structure of the theory, through the commutation relations between operators, suggests fundamental limitations on simultaneous measurement of positions and momentum of the system. This can suggest existence of a fundamental limitation on time measure- ments and its possible relation to energy measurements. There are some \u0010proofs\u0011 of existence of such limitations, however, the notions they refer to are generally loose and not well defined. We address some of these time- energy relations' derivations later. Time measurement methods are also a well discussed matter in the sub- ject of time-of-arrival measurements. Ahanarov and Bohm [3] were the first to write such time-of-arrival (TOA) operator. Since then, much literature has been produced on such operators and their interpretations. An excel- lent review can be found here [4], and also a book-length treatment [5]. Constructing physical models for time measurement was first examined by Allcock [6], [7]; his constructions lead him to the result that time-of-arrival is 21 Chapter 6. Introduction not a quantum observable. Different physical models for time measurement and possible sources of difficulties arise in measuring the time-of-arrival have been discussed since then and physicists have debated whether this deficiency of quantum mechanics in measuring time-of-arrival is a model dependent de- fect or some deep concept in the theory. The way people have approached this problem is to try to find or con- struct modified TOA operators (as we show there is no TOA operators in general) and get the probability distribution of the time of arrival. In another approach, by constructing several theoretical models for time measurements and solving the Schrodinger equation for them, people tried to find if there are limitations on the TOA measurements. Recent works of Oppenheim et al. [18], [19], [22], [23], addressing several models for time-of-arrival measurements, suggest a fundamental limitations in measuring time-of-arrival; In their works they verified the suggested rela- tion, however they left the proof as an interesting open question. Here our approach is as previous. We present the arguments that re- ject the existence of the time operators as well as time-of-arrival operators in quantum mechanics in general. Then we discuss different time-energy relations, their derivations and interpretations. Equipped with those time- energy relations, we use some of them in the study of quantum systems which we use to measure the time, the quantum clocks. As we show the dynamical bounds we get relating the systems energy with its evolution rate, put a bound on the quantum clocks minimum energy, relating it to the clocks time resolutions. Energy considerations on the clock's energy and the system's energy in- teracting with the clock to be measured, lead us to derive an accuracy lim- iting relation on the time-of-arrival measurements. The proof is general and for any measurement of the quantum time of arrival. Thus we provide a general quantum mechanical limitation on the measurement of the time of arrival. Finally we mention some application of the accuracy limiting relation in the context of quantum physics. We will be working in natural units where ~ = c = 1. 22 Chapter 7 Time Operators The parameter t in the Schrodinger equation enters as an external continuous parameter, and in quantum physics, the time appears not to correspond to any physically measurable operator. It was Pauli [8] who first demonstrated that generally there does not exist any operator associated with time. As we repeat his proof in below, such a time operator should be conjugated to the Hamiltonian and for a stable system with a Hamiltonian which is bound from below13, it is not possible to construct such an operator. In this chapter we consider properties of time related operators and the constraints that their existence exert on physical systems Hamiltonian. 7.1 Time Operators Pauli [8] has proved that having an operator corresponding to physical time for general systems with arbitrary Hamiltonian is not possible. His proof is simple and instructive and we represent it here. Suppose that there exist a self-adjoint time operator T\u00CC\u0082 conjugate to the Hamiltonian, i.e. [H\u00CC\u0082, T\u00CC\u0082 ] = i (7.1) We show that such a time operator appears as an energy shift operator to energy states. If (7.1) is true then by induction we can have [H\u00CC\u0082, T\u00CC\u0082n] = inT\u00CC\u0082n\u00E2\u0088\u00921, n \u00E2\u0089\u00A5 0 (7.2) (T\u00CC\u0082 0 \u00E2\u0089\u00A1 1), supposing a well behaved operator to guaranty higher powers. 13Or mathematically equivalent bounded from above. 23 Chapter 7. Time Operators Together with [H\u00CC\u0082, T\u00CC\u0082 0] = 0, multiplying (7.2) by (i\u00CE\u00B5)n/n! ,where \u00CE\u00B5 is an arbitrary parameter with dimension of energy, summing over n from n = o to n =\u00E2\u0088\u009E, one finds [H\u00CC\u0082, eiT\u00CC\u0082 \u00CE\u00B5] = \u00E2\u0088\u0092\u00CE\u00B5eiT\u00CC\u0082 \u00CE\u00B5, n \u00E2\u0089\u00A5 0 (7.3) Therefore, according to equation (7.3) any energy eigenstate |E\u00E3\u0080\u0089 satisfies H\u00CC\u0082eiT\u00CC\u0082 \u00CE\u00B5 |E\u00E3\u0080\u0089 = (E \u00E2\u0088\u0092 \u00CE\u00B5)eiT\u00CC\u0082 \u00CE\u00B5 |E\u00E3\u0080\u0089 That means that the operator T\u00CC\u0082 generates unitary energy translations. Since in the physical world Hamiltonians are generally bounded from below, such an operator can not exist. However it is clear that for unbounded Hamiltonians with continuous and homogeneous energy spectrum we can associate an operator whose eigenvalues represent the time. 7.2 Time-of-Arrival Operators: It has been suggested that one can construct a time-of-arrival operator that registers the time when an event first occurs. These types of operators seemed not to have the same problems as do the time operators, since these operators do not evolve with time14 and do not need to be conjugate to the Hamiltonian. However it is easy to show that, in general, these operators do not exist either [9]. Suppose we have a time-of-arrival operator \u00CF\u0084\u00CC\u0082 with eigenstates |\u00CF\u0084\u00E3\u0080\u0089. Then according to the standard quantum theory, the probability amplitude of arrival time of the state |\u00CF\u0088\u00E3\u0080\u0089 at instant t = \u00CF\u0084 would be given by \u00E3\u0080\u0088\u00CF\u0084 |\u00CF\u0088\u00E3\u0080\u0089. In other words this is the probability amplitude that a particle with the state |\u00CF\u0088\u00E3\u0080\u0089 arrives to a certain point at the time t = \u00CF\u0084 . Now transform the state |\u00CF\u0088\u00E3\u0080\u0089 forward through time by an amount t0, i.e. |\u00CF\u0088\u00E3\u0080\u0089 \u00E2\u0086\u0092 \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00CF\u0088\u00CC\u0081\u00E2\u008C\u00AA = e\u00E2\u0088\u0092iH\u00CC\u0082t0 |\u00CF\u0088\u00E3\u0080\u0089 14By definition time of arrival is independent of the flow of time and does not change as the time goes on, i.e. if I come to my office at 8am this statement is independent of time. 24 Chapter 7. Time Operators This transformation is general for any state |\u00CF\u0088\u00E3\u0080\u0089; it seems plausible to expect that the probability amplitude transforms accordingly to \u00E3\u0080\u0088\u00CF\u0084 |\u00CF\u0088\u00E3\u0080\u0089 \u00E2\u0086\u0092 \u00E3\u0080\u0088\u00CF\u0084 + t0|\u00CF\u0088(\u00CF\u0084 + t0)\u00E3\u0080\u0089 = \u00E2\u008C\u00A9 \u00CF\u0084 + t0|e\u00E2\u0088\u0092iH\u00CC\u0082t0\u00CF\u0088 \u00E2\u008C\u00AA This transformation should not change the probability amplitude of arrival time of the state. So it follows that the time-of-arrival eigenstates, |\u00CF\u0084\u00E3\u0080\u0089, should satisfy |\u00CF\u0084 + t0\u00E3\u0080\u0089 = eiH\u00CC\u0082t0 |\u00CF\u0084\u00E3\u0080\u0089 (7.4) This is the same as saying that by backward translation time through by arbitrary amount t0 any time-of-arrival eigenstate corresponding to a time of arrival \u00CF\u0084 transforms to another eigenstate, corresponding to a time of arrival \u00CF\u0084 + t0 15. However the above property of time-of-arrival eigenstates, as we will see implies the existence of an energy shift operator T\u00CC\u0082 satisfying [H\u00CC\u0082, T\u00CC\u0082 ] = i, as equation (7.1). Let us start with the equation (7.1) and show that property (7.4) is a general property of energy shift operators with continuous Hamiltonians. Again by induction we can write [H\u00CC\u0082n, T\u00CC\u0082 ] = inH\u00CC\u0082n\u00E2\u0088\u00921, n \u00E2\u0089\u00A5 0 (H\u00CC\u00820 \u00E2\u0089\u00A1 1), supposing a well behaved Hamiltonian. Introducing an arbitrary parameter t0 with dimension of time and following similar procedure as in the previous section, one finds [eiH\u00CC\u0082t0 , T\u00CC\u0082 ] = \u00E2\u0088\u0092t0eiH\u00CC\u0082t0 , n \u00E2\u0089\u00A5 0 If |\u00CF\u0084\u00E3\u0080\u0089 represents a complete set of orthonormal eigenstates of T\u00CC\u0082 , then we have T\u00CC\u0082 eiH\u00CC\u0082t0 |\u00CF\u0084\u00E3\u0080\u0089 = (\u00CF\u0084 + t0)eiH\u00CC\u0082t0 |\u00CF\u0084\u00E3\u0080\u0089 15All of us are familiar with this fact, especially during the first days after daylight saving begins. 25 Chapter 7. Time Operators which is the property (7.4). Therefore, in general, we can not have time-of-arrival operators. The exception here also is for systems with continuous homogeneous unbounded energy spectrum. 26 Chapter 8 Time-Energy Relations We argued that generally we can not have a quantum time operator and the time is not a quantum observable. There are several time-energy rela- tions proposed in physics which generally relate the uncertainty in time 4t (various possible interpretations) to the energy uncertainty 4E. The inter- pretation of those time-energy relations is a part of quantum measurement theory, and need extra attention apart from its derivation. Unlike the position-momentum uncertainty relation, there has not been a unique quantitative expression of what really is referred to by 4t in time- energy relations. Needless to say, incorrect application of the time-energy relation can lead to a great deal of confusion. In this chapter we will try to improve on deriving these relations and their interpretations. 8.1 Inaccuracies Versus Uncertainties In the theory of quantum mechanics, the measurement of a self-adjoint op- erator is theoretically possible to any desired accuracy. One can measure an observable A corresponding to an operator A\u00CC\u0082 as accurately as desired. One may also perform the measurement on another self-adjoint operator B\u00CC\u0082 which does not commute with operator A\u00CC\u0082. However, quantum mechanics forbids us from performing the measurements on both observables simultaneously while getting meaningful results. Consider two non-commuting operators A\u00CC\u0082 and B\u00CC\u0082 which do not evolve with time. We can, for example, do measurements on two ensembles of identically prepared particles. On the first group we can measure observable A as accurately as we want, while measuring B on the other group with full accuracy. This is allowed by the theory, i.e. we would get zero inaccuracy 27 Chapter 8. Time-Energy Relations for each individual measurement. Plotting the results of our measurements, we will find the distribution of the measurement results for both operators, A\u00CC\u0082 and B\u00CC\u0082, which have normal width of 4A and 4B respectively. One will find that regardless of the individual results, we always find 4A 4 B \u00E2\u0089\u00A5 12 . This is the uncertainty relation that quantum theory refers to, and it holds between the distribution of measurement results of two non-commuting operators A and B even when there is no theoretical limitation on the accuracy of individual independent measurements. However, if the experimenter uses devices with a deficiencies which pre- vent them from registering the results accurately, then the results of each measurement would be inaccurate; so, the results of each observable A and B are inaccurate with inaccuracies depending on devices. This is the famil- iar inaccuracy which appears here as well, however this type of inaccuracy seems to be avoidable in classical physics. In other words inaccuracies happen on individual measurements and are related to the measuring devices and the measuring procedures, where un- certainties are related to the system under study itself and are evident prac- tically on an ensemble of identically prepared systems. For measurements of usual quantum observables there are no such lim- itations on inaccuracies. However we will find that for quantum time mea- surement, one has to conduct the experiment inaccurately in order to have a successful registration, and attempting to improve the time accuracies above a certain amount would result in no registration. In quantum time measure- ments, we will see that the theory excludes such accurate time measurements and yield to an aborted experiment. Such limitation is inherently different from the Heisenberg uncertainty type limitations that we normally encounter in quantum mechanics. 28 Chapter 8. Time-Energy Relations 8.2 Different Time-Energy Relation Derivations in Quantum Mechanics Since the advent of quantum mechanics, the time-energy relation has had a different basis than the standard position-momentum16 uncertainty relation 4q4 p \u00E2\u0089\u00A5 1 2 In quantum mechanics time is a parameter, not an operator as the position q, therefore the usual quantum mechanical approach of deriving the uncer- tainties can not be used to derive uncertainties in time, if such a thing ever exists (some authors have argued that such uncertainty relations do not ex- ist for a parameter like time, and any such derivation is erroneous and not general enough [10], [3]). Time-energy relations, derivations and interpretations, can be catego- rized mainly in the several classes that follow17. We address different deriva- tions of such time-energy relations and try to elaborate on their various interpretations for the quantum measurement theory purposes. 8.2.1 Spread of the Wave Packet From the Fourier transform properties between conjugate variables we know that a wave packet with the frequency width of 4\u00CF\u0089 has a spread 4t in the conjugate coordinate which obeys the relation 4\u00CF\u0089 4 t \u00E2\u0089\u00A5 12 . Using this alongside with Planck relation E = ~\u00CF\u0089, there is a time-energy relation on wave packet spread that reads 4E 4 t \u00E2\u0089\u00A5 1 2 (8.1) In this derivation, however we should note that the wave function is not 16This relation is between the eigenvalues of position and the eigenvalues of momentum, not between the sole position and momentum coordinates; in the same token if we measure the time by reading some operator's eigenvalue, it is not strange to expect similar relation on time readings. 17This list was partially done before in [17]. 29 Chapter 8. Time-Energy Relations a physical identity in real space, but rather a mathematical representation for information associated to the particle; so we can not say for example that 4t is the time that the wave function sweeps a point in space, or any similar justifying notion. Writing the wave function as \u00CF\u0088(q, t) = \u00E2\u0088\u0091 E cE\u00CF\u0088E(q)e\u00E2\u0088\u0092iEt where \u00CF\u0088E(q) is the energy eigenvectors of the Hamiltonian of the system, and cE 's are coefficients of those eigenvectors in the wave function, we find that given a wave packet of width 4E in energy space, it follows that 4t can be interpreted as the time within which the wave packet does not change \u0010significantly\u0011 [21]. The above interpretation for 4t is loose; we should also bear in mind that for a single particle the wave function does not have any ontological significance other than its usual epistemological role [11]. The above relation at best can only be interpreted as a Heisenberg uncertainty type limitation on an ensemble of similarly prepared systems. 8.2.2 Reducing to Position-Momentum Relation Having Heisenberg uncertainty relation on momentum and position, using group velocity definition v = \u00E2\u0088\u0082E\u00E2\u0088\u0082p , if we take 4E = \u00E2\u0088\u0082E\u00E2\u0088\u0082p 4 p = v 4 p and 4t = 4qv we can write 4E 4 t = 4q4 p \u00E2\u0089\u00A5 1 2 (8.2) The general implication of this derivation of the relation is not clear at all, and the derivation can only be justified on a few measurement models in quantum mechanics [15] where the time parameter is associated linearly with the position eigenvalue q [since it is assumed 4t = 4qv ]; and clearly this is not the case in general. 30 Chapter 8. Time-Energy Relations 8.2.3 Variability Time We can also consider time evolution of an arbitrary quantum operator A\u00CC\u0082 under Heisenberg equation of motion, dA\u00CC\u0082dt = \u00E2\u0088\u0092i[H,A]; using standard opera- tor algebra for two non-commuting operators A\u00CC\u0082 and H\u00CC\u0082 we have 4H 4A \u00E2\u0089\u00A5 1 2 \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u008C\u00A9dA dt \u00E2\u008C\u00AA av \u00E2\u0088\u00A3\u00E2\u0088\u00A3. Defining 4\u00CF\u0084A\u00CC\u0082 = 4A{\u00E2\u008C\u00A9dA\u00CC\u0082dt \u00E2\u008C\u00AAav}\u00E2\u0088\u00921we can have a \u0010time\u0011-energy relation [12] that reads 4E 4 \u00CF\u0084A\u00CC\u0082 \u00E2\u0089\u00A5 1 2 (8.3) In the above relation although 4E is the standard measure of the statis- tical spread of energy, 4\u00CF\u0084A\u00CC\u0082 is not any statistical spread or inaccuracy of our observable, but rather a characteristic time for variability of the observable A\u00CC\u0082. This variability time, 4\u00CF\u0084A\u00CC\u0082, is not a time parameter in any sense, only having time dimension. From its definition, it is clear that 4\u00CF\u0084A\u00CC\u0082 is an ensem- ble averaged quantity, i.e an uncertainty relation, and the above relation is not an accuracy-type energy-time relation. 8.2.4 Wigner Derivation Wigner [13] has considered two weighted probability values [variances] of time and energy with respect to some fixed values t0 and E0 as \u00CF\u00842(q) = \u00E2\u0088\u00AB (t\u00E2\u0088\u0092 t0)2 |\u00CF\u0088(q, t)|2 dt\u00E2\u0088\u00AB |\u00CF\u0088(q, t)|2 dt which is weighted by the wave function at a fixed q, \u00CF\u0088(q, t) = \u00E3\u0080\u0088q|\u00CE\u00A8(t)\u00E3\u0080\u0089; and \u00C2\u00B22(q) = \u00E2\u0088\u00AB (E \u00E2\u0088\u0092 E0)2 |\u00CE\u00B7(q, E)|2 dt\u00E2\u0088\u00AB |\u00CE\u00B7(q, E)|2 dt weighed with respect to the Fourier transform of the same wave function, \u00CE\u00B7(q, E) = \u00E2\u0088\u00AB \u00CF\u0088(q, t)eiEtdt. He showed that the relation \u00CF\u0084(q)\u00C2\u00B2(q) > 1 2 (8.4) 31 Chapter 8. Time-Energy Relations holds at constant q, since \u00CF\u0088(q, t) and \u00CE\u00B7(q, E) are Fourier transforms of each other. In general t0 and E0 are not the average values of the time and energy. They are some fixed reference points to evaluate the moments with respect to. Thus \u00C2\u00B22 and \u00CF\u00842 should not in general be identified with 4E and 4t. Following the derivation, Wigner mentions that \u0010the uncertainty relation does not apply to time and energy in abstracto but to the life-time of a definite state of a system\u0011. His interpretation of \u00CF\u0084(q) is \u0010spread in time of presence at a definite quantum mechanical state\u0011. From the derivation of this \u0010spread-time\u0011-energy relation, it is implied that the above relation is an uncertainty type limitation over an ensemble of identically prepared systems. 8.2.5 Geometric Method Anandan and Aharonov [16] have derived another time-energy relation by applying geometrical concepts to the quantum mechanics. Using Schrodinger equation, i~ ddt |\u00CF\u0088(t)\u00E3\u0080\u0089 = H(t) |\u00CF\u0088(t)\u00E3\u0080\u0089, we can Taylor expand |\u00CF\u0088(t+ dt)\u00E3\u0080\u0089 to second order in dt as |\u00CF\u0088(t+ dt)\u00E3\u0080\u0089 = |\u00CF\u0088(t)\u00E3\u0080\u0089\u00E2\u0088\u0092 idt ~ H |\u00CF\u0088(t)\u00E3\u0080\u0089\u00E2\u0088\u0092 dt 2 2~ ( i dH ~ |\u00CF\u0088(t)\u00E3\u0080\u0089+ 1 ~ H2 |\u00CF\u0088(t)\u00E3\u0080\u0089 ) +O(dt3) to get |\u00E3\u0080\u0088\u00CF\u0088(t)|\u00CF\u0088(t+ dt)\u00E3\u0080\u0089|2 = 1\u00E2\u0088\u00924E2dt2 +O(dt3) (8.5) with (4E)2 = \u00E2\u008C\u00A9H2\u00E2\u008C\u00AA\u00E2\u0088\u0092 \u00E3\u0080\u0088H\u00E3\u0080\u00892 as usual definition. They define a metric on a general n-dimensional Bloch type sphere to measure the distance between states: ds2 = g\u00C2\u00B5\u00CE\u00BD\u00CC\u0084dZ\u00C2\u00B5dZ\u00CC\u0084\u00CE\u00BD \u00E2\u0089\u00A1 1\u00E2\u0088\u0092 \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u008C\u00A9\u00CF\u0088|\u00CF\u0088\u00CC\u0081\u00E2\u008C\u00AA\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A32 where Z\u00C2\u00B5's are state coordinates on that state space. It is a well defined metric, recall that the distance of any state from itself is zero, while it has maximum distance with any orthogonal state which is 1. 32 Chapter 8. Time-Energy Relations To calculate the general form of the metric, we consider two state vectors |\u00CF\u0088\u00E3\u0080\u0089 and \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00CF\u0088\u00CC\u0081\u00E2\u008C\u00AA = |\u00CF\u0088\u00E3\u0080\u0089+ |d\u00CF\u0088\u00E3\u0080\u0089+ 12 \u00E2\u0088\u00A3\u00E2\u0088\u00A3d2\u00CF\u0088\u00E2\u008C\u00AA+O(\u00E2\u0088\u00A3\u00E2\u0088\u00A3d3\u00CF\u0088\u00E2\u008C\u00AA). Differentiating the normal- ization relation \u00E3\u0080\u0088\u00CF\u0088|\u00CF\u0088\u00E3\u0080\u0089 = 1 gives \u00E3\u0080\u0088\u00CF\u0088|d\u00CF\u0088\u00E3\u0080\u0089+\u00E3\u0080\u0088d\u00CF\u0088|\u00CF\u0088\u00E3\u0080\u0089 = 0 and differentiating once more gives 2 \u00E3\u0080\u0088d\u00CF\u0088|d\u00CF\u0088\u00E3\u0080\u0089+ \u00E2\u008C\u00A9\u00CF\u0088|d2\u00CF\u0088\u00E2\u008C\u00AA+ \u00E2\u008C\u00A9d2\u00CF\u0088|\u00CF\u0088\u00E2\u008C\u00AA = 0. Therefore 1\u00E2\u0088\u0092 \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u008C\u00A9\u00CF\u0088|\u00CF\u0088\u00CC\u0081\u00E2\u008C\u00AA\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A32 = \u00E3\u0080\u0088d\u00CF\u0088|d\u00CF\u0088\u00E3\u0080\u0089 \u00E2\u0088\u0092 \u00E3\u0080\u0088\u00CF\u0088|d\u00CF\u0088\u00E3\u0080\u0089 \u00E3\u0080\u0088d\u00CF\u0088|\u00CF\u0088\u00E3\u0080\u0089 Thus g\u00C2\u00B5\u00CE\u00BD\u00CC\u0084 = \u00E3\u0080\u0088\u00E2\u0088\u0082\u00C2\u00B5\u00CF\u0088|\u00E2\u0088\u0082\u00CE\u00BD\u00CC\u0084\u00CF\u0088\u00E3\u0080\u0089 \u00E2\u0088\u0092 \u00E3\u0080\u0088\u00CF\u0088|\u00E2\u0088\u0082\u00C2\u00B5\u00CF\u0088\u00E3\u0080\u0089 \u00E3\u0080\u0088\u00E2\u0088\u0082\u00CE\u00BD\u00CC\u0084\u00CF\u0088|\u00CF\u0088\u00E3\u0080\u0089 In the two-dimensional case the metric reduces to ds2 = dZdZ\u00CC\u0084 ZZ\u00CC\u0084 = dx2 + dy2 r2 = d\u00CE\u00B82 + sin2 \u00CE\u00B8d\u00CF\u00862 which is the metric on the Bloch sphere. Representing a two dimensional state on the Bloch sphere is by assigning to any state |\u00CF\u0088\u00E3\u0080\u0089 = cos \u00CE\u00B82 |0\u00E3\u0080\u0089 + ei\u00CF\u0086 sin \u00CE\u00B82 |1\u00E3\u0080\u0089 a point on the sphere with the coordinate (\u00CE\u00B8, \u00CF\u0086). As we sketch the proof in Appendix B they show that the minimum distance in time-geodesic on the Bloch type sphere that should pass for an arbitrary state in order to get to an orthogonal state satisfies the relation t\u00E2\u008A\u00A5 4 E = pi2 . This relation means that in general an arbitrary state can only evolve to an orthogonal state in times t\u00E2\u008A\u00A5 which satisfy the relation: t\u00E2\u008A\u00A5 4 E \u00E2\u0089\u00A5 pi2 (8.6) The above relation holds for any individual state and is not an uncertainty type time-energy relation. It puts a lower bound on the time that any individual state can evolve to its orthogonal state dynamically. 8.2.6 Orthogonality Time Margolus and Levitin [14] have calculated another bound on the minimum time needed for any state of a given system to evolve into an orthogonal state. This \u0010orthogonality time\u0011 bound looks similar to the the former time-energy 33 Chapter 8. Time-Energy Relations relations that we discussed. We follow the original derivation here: Consider an arbitrary quantum state which can be written as a superposition of energy eigenstates , |\u00CF\u0088(0)\u00E3\u0080\u0089 = \u00E2\u0088\u0091 n cn |En\u00E3\u0080\u0089 For simplicity assume system has discrete energy spectrum, and choose low- est energy level E0 = 0 therefore En > 0 \u00E2\u0088\u0080n > 0. After some arbitrary time t, the state evolves to |\u00CF\u0088(t)\u00E3\u0080\u0089 = \u00E2\u0088\u0091 n cne \u00E2\u0088\u0092iEnt |En\u00E3\u0080\u0089 Let S(t) = \u00E3\u0080\u0088\u00CF\u0088(0)|\u00CF\u0088(t)\u00E3\u0080\u0089 = \u00E2\u0088\u0091 n |cn|2 e\u00E2\u0088\u0092iEnt and look for limits on smallest time which makes S(t) = 0. Looking at the real part of S(t), we get Re(S) = \u00E2\u0088\u0091 n |cn|2 cos(Ent) \u00E2\u0089\u00A5 \u00E2\u0088\u0091 n |cn|2 ( 1\u00E2\u0088\u0092 2 pi (Ent+ sin(Ent)) ) = 1\u00E2\u0088\u0092 2 \u00E3\u0080\u0088E\u00E3\u0080\u0089av pi t+ 2 pi Im(S) where we have used the relation cos\u00CE\u00B1 \u00E2\u0089\u00A5 1\u00E2\u0088\u0092 2 pi (\u00CE\u00B1+ sin\u00CE\u00B1) \u00E2\u0088\u0080\u00CE\u00B1 > 0 For the desired time torth we should have both Re(S) = 0 and Im(S) = 0, so the above equation yields to \u00E3\u0080\u0088E\u00E3\u0080\u0089av torth \u00E2\u0089\u00A5 pi 2 (8.7) 34 Chapter 8. Time-Energy Relations This shows there exists a bound on orthogonality time of any quantum state with mean energy \u00E3\u0080\u0088E\u00E3\u0080\u0089av (setting lowest energy level to zero18). Any state with mean energy \u00E3\u0080\u0088E\u00E3\u0080\u0089av can not evolve dynamically to an orthogonal state in times less than \u00CF\u0084 \u00E2\u0088\u00BC 1\u00E3\u0080\u0088E\u00E3\u0080\u0089av . Note that we have always \u00E3\u0080\u0088E\u00E3\u0080\u0089av > 0 since \u00E3\u0080\u0088E\u00E3\u0080\u0089av is an indicator of the energy spread of the quantum state; if a quantum state has zero energy spread it is in an energy eigenstate and thus does not change its state under the action of a time independent Hamiltonian. This bound holds for each individual state but is not an uncertainty type time-energy relation. Clearly in cases of limited state space dimension (like a spin with angular momentum l) we would have cycles of orthogonal states as time passes (different cycles are possible for different subsets of states). 8.3 Time-Energy Relations Comparison As we see there are a number of different time-energy relations derivations, whose results may look similar in the form but are not necessarily equivalent. It is common to see in books that they claim to prove an uncertainty relation while the proof actually demonstrates one of the time relations (8.7) or (8.6) (see for example [21]). There is a clear distinction among these time-energy relations. The re- lations (8.1), (8.2), (8.3) and (8.4) are at best statistical relations on an ensemble of identically prepared quantum systems, resembling the position- momentum relation, and have no implication on individual measurements; however the last two relations (the geometric method (8.6) and the orthog- onality time (8.7) derivations) are special time-energy relations which are fundamentally different from the previous ones. These two relations are universal and can stand on equal footing with the position-momentum uncertainty relation; and in contrast to the other time-energy relations, interpretations of these two relations are clear and 18We can repeat the derivation by choosing the highest energy level of the system equal to zero if the energy is bounded from above. Thus depending on the energy spectrum of the system, we can choose to set \u00E3\u0080\u0088E\u00E3\u0080\u0089av = Emax \u00E2\u0088\u0092 Emean or \u00E3\u0080\u0088E\u00E3\u0080\u0089av = Emean \u00E2\u0088\u0092 Emin . Using the smaller one in the orthogonality time relation gives the better estimate of the orthogonality time. 35 Chapter 8. Time-Energy Relations exact. Equations (8.6), (8.7) refer to the minimum time needed for evolving of any system from a quantum state to the orthogonal one. They both put a limit on the dynamical time19 needed for such a change. This time is not directly measurable though, due to the collapse of the wave function; any attempt to observe the system, collapse its wave function in a non-dynamical way and destroys the natural time evolution. Those two equations may look inconsistent though, since it is possible to have an energy spectrum with quite different \u00E3\u0080\u0088E\u00E3\u0080\u0089av20 and 4E values. For a simple two level system in which the orthogonality time is directly calculable both equations produce the exact result and are equivalent since 4E and \u00E3\u0080\u0088E\u00E3\u0080\u0089av are equal. For systems with energy spectrum with different \u00E3\u0080\u0088E\u00E3\u0080\u0089av and 4E the possible inconsistency fades if we recall that both of these equations put only lower limits on the orthogonality time, and in all the cases we have Max ( pi 24 E , pi 2 \u00E3\u0080\u0088E\u00E3\u0080\u0089av ) \u00E2\u0089\u00A4 torth <\u00E2\u0088\u009E (8.8) Choosing the non-trivial bound (which gives higher result) should not be hard if we have the system's Hamiltonian and so its energy spectrum. We only need to take the smallest among 4E and \u00E3\u0080\u0088E\u00E3\u0080\u0089av = Emax \u00E2\u0088\u0092 Emean or\u00E2\u008C\u00A9 E\u00CC\u0081 \u00E2\u008C\u00AA av = Emean \u00E2\u0088\u0092Emin (see footnote 18). 19Clearly these relations are not related to the strange collapse of the wave function; in that yet \u0010non-dynamical\u0011 phenomenon any state can be projected to an orthogonal state at anytime with some probability that can be calculated by Born formula in quantum mechanics. 20Average energy is only meaningful if we set an origin for the zero energy; as follows from the derivation, we set the zero energy as the lowest energy of the system in the derivation of the orthogonality time relation. 36 Chapter 9 Quantum Time Measuring Devices In the previous chapter we considered different time-energy relations and possible limitations they may bring about, such as the limitations on the time that a state can evolve to an orthogonal state. In this chapter equipped to those relations we apply relevant ones to find possible limitations they impose on the quantum measuring devices. In the pragmatic view, without having a measuring device to measure a system parameter, that parameter has no \u0010real\u0011 meaning. Therefore, in order to discuss quantum time measurements it is necessary to construct realistic models of time measuring devices, which we shall call by the general name clock, and study their behaviour in relation to the quantum systems. As we saw, time is not an observable in quantum theory. Therefore we should make models of devices that have some observable states changing linearly with the passage of time; we measure the time then by making measurements on those observable states of the clock, which we generally refer to as \u0010pointer states\u0011. 9.1 Quantum Models for Clocks A physical clock is a system whose pointer state changes with time in a linear way. Physical clocks which we use in everyday life are periodic systems; the way we measure the time with them is by enumerating the number of full periods besides the clock pointer's reading, namely 7:29 AM means 7 full rotation of minute pointer and 29/60 of a full rotation after the midnight. By having clocks which count different time periods- years, months, days, 37 Chapter 9. Quantum Time Measuring Devices hours, minutes, seconds, etc...- we determine time. This makes it possible to have a convenient clock with limited dimension. There are two class of clocks, linear clocks which continuously measure the time and periodic clocks which their reading jumps and resets after they rich the maximum time that they can hold. 9.1.1 Linear Clocks The simplest model for a clock can be a massive free particle which is moving with constant speed. The position of the particle changes linearly with time, so if we measure its position we can deduce the time. Ideal linear clock has the Hamiltonian Hclock = Py with y the pointer. The above Hamiltonian can be constructed from the free particle Hamil- tonian H = P 22m . If m is very large taking P\u00CC\u0083 = Py \u00E2\u0088\u0092 P0, the Hamiltonian can be written as H = P 2 0 2m + P\u00CC\u0083 P0 m + P\u00CC\u0083 2 2m . If we only look at States with\u00E2\u008C\u00A9 P\u00CC\u0083 2 ( P0 m )2\u00E2\u008C\u00AA \u00C3\u0080 \u00E2\u008C\u00A9P\u00CC\u0083 4\u00E2\u008C\u00AA for the period of measurement, then we can neglect the P\u00CC\u0083 2 term and we have linear clock [19]. In order to read the time we measure the coordinate y conjugate to Py. The clocks linearity is evident by considering the Heisenberg equation of motion for variable y, y(t)\u00E2\u0088\u0092 y(t0) = \u00E2\u0088\u0092i \u00E2\u0088\u00AB t t0 [Hclock, y] dt = t\u00E2\u0088\u0092 t0. For the initial state of the clock's pointer of the form of f(y) we can 38 Chapter 9. Quantum Time Measuring Devices calculate the time evolution of the pointer as f (y, t) = e\u00E2\u0088\u0092iHtf (y, 0) = e\u00E2\u0088\u0092iHt \u00E2\u0088\u00AB F (p) eipyydpy = \u00E2\u0088\u00AB e\u00E2\u0088\u0092ipytF (p) eipyydpy = \u00E2\u0088\u00AB F (p) eipy(y\u00E2\u0088\u0092t)dpy = f (y \u00E2\u0088\u0092 t, 0) . Therefore due to this Hamiltonian, any pointer state keeps its form exactly whilst changes position; that means the clock accuracy does not change by time. The Hamiltonian for this ideal clock is unbounded and therefore it is possible to find a time operator for it. The inaccuracy of time measurements by this clock is given by \u00CE\u00B4t = \u00CE\u00B4y. As we discussed in section 8.1 there is no limitation on any individual measurements of the position coordinate and therefore the readings of the clock. However in order to read the time accurately we need to make the initial state of the clock's pointer close to an eigenstate of y(t0); the spread of this initial value will be an inaccuracy in the clock. Keeping in mind that the Hamiltonian does not commute with position, we see that demanding an accurate reading cause a disturbed Hamiltonian and a great uncertainty in Hclock. In the case of an ideal linear clock model we are able to have a \u0010time op- erator\u0011 whose readings represent the time for us; however, in general systems with bounded Hamiltonian we can not find such operators or such operators do not evolve linearly with time. 9.1.2 Periodic Clocks Asher Peres [20] considered another model for the quantum clock, using the Larmor precession of spin states to register the time. These clocks are periodic and their resolution can be made arbitrarily fine by using bigger spin state systems. 39 Chapter 9. Quantum Time Measuring Devices Consider a state of this clock given by this normalized state vector |\u00CF\u0088(t)\u00E3\u0080\u0089 = (2j + 1)\u00E2\u0088\u00921/2 j\u00E2\u0088\u0091 n=\u00E2\u0088\u0092j e\u00E2\u0088\u0092in\u00CF\u0089t |n\u00E3\u0080\u0089 which |n\u00E3\u0080\u0089's are orthogonal eigenstates of Jz , \u00CF\u0089 is a positive constant and j is a large positive integer or half integer. The clock Hamiltonian H = \u00CF\u0089Jz satisfies Hc |n\u00E3\u0080\u0089 = n\u00CF\u0089 |n\u00E3\u0080\u0089 where n = \u00E2\u0088\u0092j,\u00E2\u0088\u0092j + 1, \u00C2\u00B7 \u00C2\u00B7 \u00C2\u00B7 , j. The above state vector evolves with time by going through the sequences of the orthogonal basis vectors, |\u00CF\u0086m\u00E3\u0080\u0089, which are defined by: |\u00CF\u0086m\u00E3\u0080\u0089 = (2j + 1)\u00E2\u0088\u00921/2 j\u00E2\u0088\u0091 n=\u00E2\u0088\u0092j e \u00E2\u0088\u0092i 2pinm 2j+1 |n\u00E3\u0080\u0089 m = \u00E2\u0088\u0092j, \u00C2\u00B7 \u00C2\u00B7 \u00C2\u00B7 , j Writing the state functions in the periodic angular space bases \u00E3\u0080\u0088\u00CE\u00B8|n\u00E3\u0080\u0089 = (2pi)\u00E2\u0088\u00921/2ein\u00CE\u00B8 and \u00CF\u0086(m, \u00CE\u00B8) = \u00E3\u0080\u0088\u00CE\u00B8|\u00CF\u0086m\u00E3\u0080\u0089, the above can be written as: \u00CF\u0086(m, \u00CE\u00B8) = 1\u00E2\u0088\u009A 2piN sin ( N 2 ( \u00CE\u00B8 \u00E2\u0088\u0092 2pimN )) sin ( 1 2 ( \u00CE\u00B8 \u00E2\u0088\u0092 2pimN )) N = 2j + 1 which can be regarded as pointer states of the clock pointing towards \u00CE\u00B8 = 2pimN direction. Time reading can be done by reading the \u0010clock time\u0011 operator Tc = \u00CF\u0084 \u00E2\u0088\u0091 m m |\u00CF\u0086m\u00E3\u0080\u0089 \u00E3\u0080\u0088\u00CF\u0086m| where \u00CF\u0084 is the time resolution of the clock. The time resolution of this clock can be related to other parameters considering \u00CF\u0089 = 2pi/(2j+1)\u00CF\u0084 , that gives us the time resolution of \u00CF\u0084 = 2pi(2j+1)\u00CF\u0089 . This amount of time is also the time that a pointer state \u00CF\u0086m goes to the next orthogonal state, i.e. it is the orthogonality time. The clock shows the true time if the time measurement happens to be at times t = m\u00CF\u0084 . In other times with a high probability the clock pointer points to one of the adjacent pointer times. The probability of finding value 40 Chapter 9. Quantum Time Measuring Devices m\u00CF\u0084 at time t falls as P (m, t) = |\u00E3\u0080\u0088\u00CF\u0086m|\u00CF\u0086t\u00E3\u0080\u0089|2 = \u00EF\u00A3\u00AB\u00EF\u00A3\u00AD 1 N j\u00E2\u0088\u0091 n=\u00E2\u0088\u0092j e\u00E2\u0088\u0092in 2pi N (m\u00E2\u0088\u0092 t\u00CF\u0084 ) \u00EF\u00A3\u00B6\u00EF\u00A3\u00B82 = 1 N2 sin2 ( N 2 ( 2pi N ( m\u00E2\u0088\u0092 t\u00CF\u0084 ))) sin2 ( 1 2 ( 2pi N ( m\u00E2\u0088\u0092 t\u00CF\u0084 ))) (9.1) [Fig.9.1] which has a spread that is proportional to 1N . Figure 9.1: Periodic clock's time reading probability for the case of N=12. The curves show the probability distributions of getting the first 3 pointers with time. To calculate the time uncertainty in our measurements we need to calcu- late \u00E3\u0080\u0088Tc\u00E3\u0080\u0089t = \u00E2\u0088\u0091 m m\u00CF\u0084P (m, t) and \u00E2\u008C\u00A9 T2c \u00E2\u008C\u00AA t = \u00E2\u0088\u0091 m m2\u00CF\u00842P (m, t) at arbitrary times and get 4Tc = \u00E2\u0088\u009A \u00E3\u0080\u0088T2c\u00E3\u0080\u0089t \u00E2\u0088\u0092 \u00E3\u0080\u0088Tc\u00E3\u0080\u00892t which is plotted for the case j = 6 in Fig.9.2. It appears in the plot that the maximum uncertainty in the time mea- surement depends on when we measure the time. This rather unexpected result is due to the clocks time discontinuity which jumps from time t = j to t = \u00E2\u0088\u0092j. We can however, always redefine our nearest clock pointer as t = 0 41 Chapter 9. Quantum Time Measuring Devices Figure 9.2: Uncertainty in time measurement4t for the caseN = 2j+1 = 13 pointer. Thus the true amount of the worst time uncertainty is the lowest peak in the plot . The uncertainty of time measurements clearly is zero for the times which t = m\u00CF\u0084 . A straightforward calculation of the commutator [Tc,Hc] shows that it does not satisfy [Tc,Hc] = i~ as it might be expected. The calculation gives \u00E3\u0080\u0088\u00CF\u0086n| [Tc,Hc] |\u00CF\u0086m\u00E3\u0080\u0089 = i~ 2pii(n\u00E2\u0088\u0092m)/N1\u00E2\u0088\u0092 exp (2pii(n\u00E2\u0088\u0092m)/N) (9.2) Having 4E = (\u00CF\u0089/\u00E2\u0088\u009A3)(j2 + j)1/2 and \u00E3\u0080\u0088E\u00E3\u0080\u0089av = j\u00CF\u0089 we can verify time- energy relations (8.6), (8.7) . Equation (8.6), in the large j limit, gives us dt\u00E2\u008A\u00A5 \u00E2\u0089\u00A5 pi \u00E2\u0088\u009A 3 2\u00CF\u0089j for the minimum time that a pointer state can evolve to another orthogonal state, while equation (8.7) gives us torth \u00E2\u0089\u00A5 pi2\u00CF\u0089j for that amount. So in this model clock we verify that \u00CF\u0084 > max(dt\u00E2\u008A\u00A5, torth) as is expected from our constructed lower bounds on the orthogonality time in the previous chapter. 42 Chapter 9. Quantum Time Measuring Devices 9.2 General Properties of Quantum Clocks As we mentioned earlier quantum time is being measured by means of ob- serving the dynamical behaviour of a \u0010clock\u0011 system. Quantum clocks are quantum systems with definite observable pointer states being able to reg- ister the time of an event. Pointer states by definition pass through a suc- cession of states at constant time intervals under dynamics of the clock. We discussed the main two models of quantum clocks in the previous section. Nevertheless there are certain properties that are general for all physical clocks regardless of their detail. 9.2.1 Clock's Resolution A quantum clock is characterized as a system that passes through a sequence of distinguishable pointer states at equal time intervals. Pointer states of clocks should, by definition, evolve by the clock resolution time [clock's ac- curacy] to the next immediate orthogonal state. The clock can not be used to register times shorter than its orthogonality time in a reliable way. This implies that the best time resolution of the clock, \u00CF\u0084 , is equal to the orthog- onality time of its pointer states. In the intermediate times between the clocks pointer times, clock's read- ing is inaccurate. This is due to the fact that the quantum clock is a discrete time registrar. The clock reading however, most probably will be one of the neighbouring pointer times, since the contributions from the far pointer states are negligible and the probability of getting them falls off fast (cf. Eq (9.1)). 9.2.2 Clock's Energy Ideal clock systems have no bound on energy, and therefore, as we saw, it is in principle possible to construct a time operator for them. On the other hand, physical clocks should have lower bounds in their energy in order to be stable, and assigning an operator to measure the time is not possible. However, it is possible to use physical clocks to approximate ideal ones, 43 Chapter 9. Quantum Time Measuring Devices having both the duration that the clock should operate and the accuracy needed [30]. As we mentioned, the clock's best resolution \u00CF\u0084 is the same as its orthog- onality time by definition, and this consideration along with the relations we found on the orthogonality time, gives us a bound on the minimum mean energy of the clock system and its accuracy. Thus using equation (8.7) we can write \u00CF\u0084 \u00E2\u0089\u00A5 pi 2 \u00E3\u0080\u0088Eclock\u00E3\u0080\u0089av (9.3) where \u00E3\u0080\u0088Eclock\u00E3\u0080\u0089av is clock's mean energy provided setting its lowest populated energy level zero. This shows that there is a direct proportionality between the accuracy of the clock and its energy; the more accurate the time mea- surement we want, the more energetic the clock we need to use. This general rule has not been explicitly proved previously in the literature; although has been verified studying clock models on a case by case basis. There is another relation derived from equation (8.6), which puts a bound on the clock's normal energy width and its accuracy \u00CF\u0084 \u00E2\u0089\u00A5 pi 24 Eclock (9.4) Therefore the more accurate the clocks the more uncertain their energy. If we consider the clock energy spread around its mean-energy, it spans at least by 4Eclock =Max (\u00E3\u0080\u0088Eclock\u00E3\u0080\u0089av ,4Eclock) . (9.5) Thus highly accurate clocks have large energy spread around their mean energy. 9.2.3 A \u0010Time\u0011-Energy Relation As mentioned before in order to read the quantum time we use the clock pointer states. Quantum clocks can be used to read the time for just a single reading; from this aspect quantum clocks work like stopwatches. Obviously the time readings can have statistical spread due to quantum nature of the 44 Chapter 9. Quantum Time Measuring Devices pointer state and that has nothing to do to the nature of the time. Here is a good place to make the distinction between the time that we read in clocks and the time which is a coordinate in our four dimensional space-time. A similar distinction has been made clearly for space, as we distinguish the result of location measurements by position \u0010q\u0011 contrasting with the coordinate component of location which we refer to as \u0010x\u0011. Also it is important to emphasize that there is no relation between the space-time coordinates and the properties of a system. Though it looks trivial, it is widely ignored that there is a fundamental difference between the position \u0010q\u0011 and the coordinate \u0010x\u0011: there exists a limiting relation between eigenvalues of the position and eigenvalues of the momentum for a certain system, not for the space-time coordinates. Unfortunately, unlike the case of the position \u0010q\u0011 and the coordinate \u0010x\u0011, there is not a clear distinction when physicists refer to the time as a coordinate and when they refer to it as a clock reading; they both have been shown by the symbol t which is confusing when they are not distinguished clearly in discussions. Let us represent the coordinate component of time by t and call it time, while the result of time measurement shall be called tempo, T, which is the result of the reading of the quantum pointer state vector, \u00CF\u0086. We show there exists an uncertainty type relation between readings of the clock pointer state, tempo, and its energy, similar to the position-momentum uncertainty relation. In the most general form of the clock's Hamiltonian, in order to have pointer states which evolve linearly with time, we should have a Hamiltonian that reads as Hclock = \u00E2\u0088\u0092i \u00E2\u0088\u0082 \u00E2\u0088\u0082\u00CF\u0086 (9.6) Having such Hamiltonian, our quantum pointer state vectors \u00CF\u0086, evolve lin- early with time and can be used for the time measurements. Now a relation between normal width of pointer state readings, tempo, and the clock's energy follows straightforward from the general uncertainty 45 Chapter 9. Quantum Time Measuring Devices principle: 4Hclock 4 \u00CF\u0086 \u00E2\u0089\u00A5 12 |[Hclock, \u00CF\u0086]| 4Eclock 4 T \u00E2\u0089\u00A5 12 Therefore, there exists an uncertainty relation between tempo and clock's energy, quite similar to Heisenberg position-momentum uncertainty relation; calling this relation a time-energy relation is a misinterpretation, though. This tempo-energy uncertainty relation can be used in experimental re- sults on ensembles of both identically prepared clocks and systems; using it over readings of a single clock is meaningless. We can see that the normal width of the pointer state readings is of the same order of magnitude as the clock's accuracy, as it should be expected [ cf. Eq(9.4)]. In the above derivation of the tempo-energy uncertainty relation, we should note that the relation [\u00CF\u0086,Hclock] = i~ holds only if we define the range of \u00CF\u0086 from \u00E2\u0088\u0092\u00E2\u0088\u009E to \u00E2\u0088\u009E. In the subspace of periodic functions with the period 2pi, like in our periodic clock setup the amount of the commutator depends on states as we already mentioned in Eq(9.2). 9.2.4 Other Fundamental Limitations on Quantum Clocks Salecker and Wigner [31] showed, by applying quantum limitations and rel- ativity principles, that there are limits on the clock's mass and duration of the measurement. They showed the mass of the clock should exceed a cer- tain value which depends on the accuracy of the clock and the time interval which clock is used, as well as the size of the clock. The ingredients to drive those physical limits are general principles of quantum mechanics and general relativity which should be satisfied in the low-energy regime of space time. Since we like to confine our discussion in this thesis only to pure quantum mechanical aspects of the problem, we mention those derivations in the Appendix C for the sake of completeness. 46 Chapter 10 Quantum Time Measurements Until now we have considered the dynamics of clocks on their own; however in measuring the time we use the clocks which are connected to the systems under study. So we need to consider the system-clock compound dynamics and study the effects that the coupling would have on the quantum system. Here as we will see, the main concern is energy considerations for the clock- system complex. We study how introducing a clock to a quantum system may affect the dynamical evolution of that system and its time variables. 10.1 Measuring With a Clock As we saw, the energy spread of the clock is directly related to its maximum time resolution (equation (9.3)): \u00E3\u0080\u0088Hclock\u00E3\u0080\u0089 \u00E2\u0089\u00A5 1\u00CF\u0084 , so for any desired accuracy there is a minimum energy spread and uncertainty in energy (equation (9.4)) required for the clock, regardless of its internal structure. We take ginteraction to represent certain conditions where the clock start working. For example gint = \u00CE\u00B8(x \u00E2\u0088\u0092 x0) represent the case where the clock works only if x \u00E2\u0089\u00A5 x0. Our total Hamiltonian then can be written as Htot = Hsys + \u00CE\u00B1gintHclock. To consider the rate of the clock pointer's evolution with time, we may use Heisenberg equation of motion for the clock Hamiltonian (9.6). Thus, 47 Chapter 10. Quantum Time Measurements we will have\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u0082\u00CF\u0086\u00E2\u0088\u0082t \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3 = |[Htot, \u00CF\u0086]| = |[Hclock, \u00CF\u0086]| = \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00CE\u00B1 [ \u00E2\u0088\u0082\u00E2\u0088\u0082\u00CF\u0086, \u00CF\u0086 ]\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3 = |\u00CE\u00B1| , for the evolution rate of the clock's pointer. We already know that we can adjust the rate that the clock registers the time by setting the clock's energy span, equations (9.3) and (9.6). The above relation shows that we can also adjust the rate that the clock registers the time by setting \u00CE\u00B1 in the coupling term of Htot . This property is interesting since it implies that in physical systems, a time measurement with a highly accurate clock loosely coupled to the system is equivalent to a time measurement with an almost inaccurate clock; however this clock has a big coupling within the system. So the overall accuracy of time measurement experiments relates to both the energy spread of the clock and the coupling constant as \u00CE\u00B1 \u00E3\u0080\u0088Eclock\u00E3\u0080\u0089 \u00E2\u0089\u00A5 1\u00CF\u0084 . Without loss of generality, we will keep \u00CE\u00B1 = 1 and attribute the accuracy of the time measurements only to an equivalent clock with \u00E3\u0080\u0088Eclock\u00E3\u0080\u0089 equal to \u00CE\u00B1 \u00E3\u0080\u0088Eclock\u00E3\u0080\u0089. 10.2 A Toy Model: Spin System Coupled to a Linear Clock To see the effect of coupling a linear clock to a quantum system, we study a simple exactly solvable model. For a simple 2-level quantum spin system with the Hamiltonian H = \u00CF\u0083x, we know that for the initial state of |\u00CF\u00880\u00E3\u0080\u0089 = |\u00E2\u0086\u0093z\u00E3\u0080\u0089, we get the spin precession around the x axis and the spin points towards the same initial direction half the times in average. If we couple a linear clock to such a system, we can exactly solve the compound clock-spin system, and see the effect of the accuracy of the coupled clock in the afore mentioned observation that is the time that the spin on average points to the initial direction. As we will find coupling an accurate clock with high energy uncertainty to the system, will stop the time evolution of the spin systems. 48 Chapter 10. Quantum Time Measurements We can write our 2-level spin system coupled to a clock Hamiltonian according to: H = \u00CE\u00B1 2 \u00CF\u0083x + ( 1 + \u00CF\u0083z 2 ) p. Therefore the clock works only if the system is in the upper spin state, |\u00E2\u0086\u0091z\u00E3\u0080\u0089, and stops otherwise. The Hamiltonian can be written as H = p 2 I + \u00CE\u00B1 2 \u00CF\u0083x + p 2 \u00CF\u0083z = p 2 I + \u00E2\u0084\u00A6 2 (cos \u00CE\u00B8\u00CF\u0083z + sin \u00CE\u00B8\u00CF\u0083x) where \u00E2\u0084\u00A6 = \u00E2\u0088\u009A p2 + \u00CE\u00B12 and cos \u00CE\u00B8 = p \u00E2\u0084\u00A6 and sin \u00CE\u00B8 = \u00CE\u00B1 \u00E2\u0084\u00A6 . The time evolution follows |0p(t)\u00E3\u0080\u0089 = e\u00E2\u0088\u0092iHt |0p(0)\u00E3\u0080\u0089 = e\u00E2\u0088\u0092i( p 2 I+\u00E2\u0084\u00A6 2 (cos \u00CE\u00B8\u00CF\u0083z+sin \u00CE\u00B8\u00CF\u0083x))t |0\u00E3\u0080\u0089 |p\u00E3\u0080\u0089 = e\u00E2\u0088\u0092i p 2 t ( cos \u00E2\u0084\u00A6t 2 I \u00E2\u0088\u0092 i sin \u00E2\u0084\u00A6t 2 (cos \u00CE\u00B8\u00CF\u0083z + sin \u00CE\u00B8\u00CF\u0083x) ) |0\u00E3\u0080\u0089 |p\u00E3\u0080\u0089 which result in |0p(t)\u00E3\u0080\u0089 = e\u00E2\u0088\u0092i p 2 t (( cos \u00E2\u0084\u00A6t 2 + i sin \u00E2\u0084\u00A6t 2 cos \u00CE\u00B8 ) |0\u00E3\u0080\u0089 \u00E2\u0088\u0092 i sin \u00E2\u0084\u00A6t 2 sin \u00CE\u00B8 |1\u00E3\u0080\u0089 ) |p\u00E3\u0080\u0089 . For the full clock system we can write |0clock(t)\u00E3\u0080\u0089 = \u00E2\u0088\u00AB dpF (p)e\u00E2\u0088\u0092i p 2 t |p\u00E3\u0080\u0089 (( cos \u00E2\u0084\u00A6t 2 + i sin \u00E2\u0084\u00A6t 2 cos \u00CE\u00B8 ) |0\u00E3\u0080\u0089 \u00E2\u0088\u0092 i sin \u00E2\u0084\u00A6t 2 sin \u00CE\u00B8 |1\u00E3\u0080\u0089 ) 49 Chapter 10. Quantum Time Measurements We need to calculate \u00E3\u0080\u00880clock(t)| q |0clock(t)\u00E3\u0080\u0089 = \u00E3\u0080\u00880clock(t)| i d dp |0clock(t)\u00E3\u0080\u0089 to find the average time the system spends in upper spin state. We have \u00E2\u0084\u00A6 = \u00E2\u0088\u009A p2 + \u00CE\u00B12 and so ddp = d\u00E2\u0084\u00A6dp dd\u00E2\u0084\u00A6 = p \u00E2\u0084\u00A6 d d\u00E2\u0084\u00A6 . We get for i d dp |0clock(t)\u00E3\u0080\u0089 = t2 |0clock(t)\u00E3\u0080\u0089 \u00E2\u0088\u0092 \u00E2\u0088\u00AB dpF (p) |p\u00E3\u0080\u0089 ie\u00E2\u0088\u0092i p2 t t 2 p \u00E2\u0084\u00A6 sin \u00E2\u0084\u00A6t 2 |0\u00E3\u0080\u0089 \u00E2\u0088\u0092 \u00E2\u0088\u00AB dpF (p) |p\u00E3\u0080\u0089 e\u00E2\u0088\u0092i p2 t t 2 p \u00E2\u0084\u00A6 cos \u00E2\u0084\u00A6t 2 cos \u00CE\u00B8 |0\u00E3\u0080\u0089 \u00E2\u0088\u0092 \u00E2\u0088\u00AB dpF (p) |p\u00E3\u0080\u0089 e\u00E2\u0088\u0092i p2 t 1 \u00E2\u0084\u00A6 sin \u00E2\u0084\u00A6t 2 |0\u00E3\u0080\u0089 \u00E2\u0088\u0092 \u00E2\u0088\u00AB dpF (p) |p\u00E3\u0080\u0089 e\u00E2\u0088\u0092i p2 t p 2 \u00E2\u0084\u00A6 (\u00E2\u0088\u00921 \u00E2\u0084\u00A62 ) sin \u00E2\u0084\u00A6t 2 |0\u00E3\u0080\u0089 + \u00E2\u0088\u00AB dpF (p) |p\u00E3\u0080\u0089 e\u00E2\u0088\u0092i p2 t t 2 p \u00E2\u0084\u00A6 cos \u00E2\u0084\u00A6t 2 sin \u00CE\u00B8 |1\u00E3\u0080\u0089 + \u00E2\u0088\u00AB dpF (p) |p\u00E3\u0080\u0089 e\u00E2\u0088\u0092i p2 t p \u00E2\u0084\u00A6 (\u00E2\u0088\u0092\u00CE\u00B1 \u00E2\u0084\u00A62 ) sin \u00E2\u0084\u00A6t 2 |1\u00E3\u0080\u0089 The non-vanishing terms which involve time -assuming a symmetric clock wave function in the momentum space- are \u00E3\u0080\u0088q\u00E3\u0080\u0089 = t 2 \u00E2\u0088\u0092 t 2 \u00E2\u008C\u00A9( p \u00E2\u0084\u00A6 )2 sin2 \u00E2\u0084\u00A6t 2 \u00E2\u008C\u00AA \u00E2\u0088\u0092 t 2 \u00E2\u008C\u00A9( p \u00E2\u0084\u00A6 )2 cos2 \u00E2\u0084\u00A6t 2 \u00E2\u008C\u00AA \u00E2\u0088\u0092 \u00E2\u008C\u00A9 1 2\u00E2\u0084\u00A6 sin\u00E2\u0084\u00A6t \u00E2\u008C\u00AA + \u00E2\u008C\u00A9 p2 2\u00E2\u0084\u00A63 sin\u00E2\u0084\u00A6t \u00E2\u008C\u00AA = t 2 \u00E2\u0088\u0092 t 2 \u00E2\u008C\u00A9( p \u00E2\u0084\u00A6 )2\u00E2\u008C\u00AA\u00E2\u0088\u0092\u00E2\u008C\u00A9 1 2\u00E2\u0084\u00A6 (\u00CE\u00B1 \u00E2\u0084\u00A6 )2 sin\u00E2\u0084\u00A6t \u00E2\u008C\u00AA Considering a Gaussian distribution for the clock wave function F (p) = 4 \u00E2\u0088\u009A 2 pip20 e \u00E2\u0088\u0092 p2 p20 , where p0 is the clock energy uncertainty. The second term \u00E2\u008C\u00A9( p \u00E2\u0084\u00A6 )2\u00E2\u008C\u00AA = 50 Chapter 10. Quantum Time Measurements \u00E2\u0088\u00AB dpF 2(p) ( p \u00E2\u0084\u00A6 )2 then can be integrated analytically as \u00E2\u008C\u00A9( p \u00E2\u0084\u00A6 )2\u00E2\u008C\u00AA = 1 + \u00E2\u0088\u009A pi \u00E2\u0088\u009A 2\u00CE\u00B1 p0 e \u00C5\u009F\u00E2\u0088\u009A 2\u00CE\u00B1 p0 \u00C5\u00A52 ( erf (\u00E2\u0088\u009A 2\u00CE\u00B1 p0 ) \u00E2\u0088\u0092 1 ) where erf(x) is the error function and is defined as erf(x) = 2\u00E2\u0088\u009A pi \u00E2\u0088\u00AB x 0 e \u00E2\u0088\u0092u2du. Using the error function series expansion for the limiting cases of p0 \u00C3\u0080 \u00CE\u00B1 and \u00CE\u00B1\u00C3\u0080 p0, we get\u00E2\u008C\u00A9( p \u00E2\u0084\u00A6 )2\u00E2\u008C\u00AA == { 1\u00E2\u0088\u0092\u00E2\u0088\u009Api2 2\u00CE\u00B1p0 \u00E2\u0088\u0092\u00E2\u0086\u0092 1 p0 \u00C3\u0080 \u00CE\u00B1( p0 2\u00CE\u00B1 )2 \u00E2\u0088\u0092\u00E2\u0086\u0092 0 \u00CE\u00B1\u00C3\u0080 p0 To Evaluate the third term we notice that for times t\u00C3\u0080 1 we can ignore this term due to fast oscillations of the sinusoidal term we can ignore this term safely. For short times this term adds a small oscillating value that can be estimated by recalling that \u00E2\u0088\u00921 \u00E2\u0089\u00A4 sin\u00E2\u0084\u00A6t \u00E2\u0089\u00A4 1 and so \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u008C\u00A9 12\u00E2\u0084\u00A6 (\u00CE\u00B1\u00E2\u0084\u00A6)2 sin\u00E2\u0084\u00A6t\u00E2\u008C\u00AA\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3 \u00E2\u0089\u00A4\u00E2\u008C\u00A9 1 2\u00E2\u0084\u00A6 ( \u00CE\u00B1 \u00E2\u0084\u00A6 )2\u00E2\u008C\u00AA . However we have \u00E2\u008C\u00A9 1 2\u00E2\u0084\u00A6 (\u00CE\u00B1 \u00E2\u0084\u00A6 )2\u00E2\u008C\u00AA = { \u00E2\u008C\u00A9 1 2\u00CE\u00B1 \u00E2\u008C\u00AA p0 \u00C2\u00BF \u00CE\u00B1\u00E2\u008C\u00A9 \u00CE\u00B12 2p3 \u00E2\u008C\u00AA p0 \u00C3\u0080 \u00CE\u00B1 \u00E2\u0088\u0092\u00E2\u0086\u0092 0 and thus this term is negligible in both limiting cases. Adding all terms together we get for the expectation time that our spin system initially in the down state, spends on the upper state to be \u00E3\u0080\u0088qt\u00E3\u0080\u0089 = t2 \u00E2\u0088\u009A pi \u00E2\u0088\u009A 2\u00CE\u00B1 p0 e \u00C5\u009F\u00E2\u0088\u009A 2\u00CE\u00B1 p0 \u00C5\u00A52 ( 1\u00E2\u0088\u0092 erf (\u00E2\u0088\u009A 2\u00CE\u00B1 p0 )) as is plotted in Fig.10.1. In the two limiting cases, high accuracy clock, p0 \u00C3\u0080 \u00CE\u00B1 and low accuracy clock, \u00CE\u00B1\u00C3\u0080 p0, it simplifies to \u00E3\u0080\u0088qt\u00E3\u0080\u0089 = \u00EF\u00A3\u00B1\u00EF\u00A3\u00B2\u00EF\u00A3\u00B3 t 2 \u00E2\u0088\u009A pi 2 2\u00CE\u00B1 p0 \u00E2\u0088\u0092\u00E2\u0086\u0092 0 p0 \u00C3\u0080 \u00CE\u00B1 (high accuracy clock) t 2 ( 1\u00E2\u0088\u0092 ( p02\u00CE\u00B1)2) \u00E2\u0088\u0092\u00E2\u0086\u0092 t2 \u00CE\u00B1\u00C3\u0080 p0 (low accuracy clock) . 51 Chapter 10. Quantum Time Measurements Figure 10.1: Exact form of the \u0010normalized\u0011 expectation value of the mea- sured time by a linear clock. The clock with energy uncertainty p0 is coupled to a two level spin system with energy a. As it is visible from the plot in Fig.10.1, when the clock's energy un- certainty is getting higher than the systems energy, systems evolution slows down very dramatically. Therefore coupling a clock with energy uncertainty higher than the initial systems energy to the spin system, considerably slows down the spin system evolution. We can also plot the time that the clock registers -the amount of time that the spin system spends in the upper state- versus the clocks energy uncertainty (see Figs.10.2, 10.3, 10.4 and 10.5 in the following pages). As we mentioned the system time evolution -with fast damping small oscillations- slows down more and more as we use more and more accurate clocks to observe its time evolution. 52 Chapter 10. Quantum Time Measurements Figure 10.2: Case p0 = 0.1a Figure 10.3: Case p0 = a 53 Chapter 10. Quantum Time Measurements Figure 10.4: Case p0 = 10a Figure 10.5: Case p0 = 50a 54 Chapter 11 Measurement of the Time-of-Arrival The measurement of the time-of-arrival has been an interesting subject both for the experimental physicists and the theoretical ones. Different approaches have been conducted to discuss the problem and explore different aspects of the problem. It is important to emphasis that the determination of the time-of-arrival involves only a single act of measurement that corresponds to the registration of the particle by the detector. In each run of experiment, at certain times we can check if the particle has entered the detector, and by then we can construct the probability distribution of the time-of-arrival. This approach has been followed by several works [28], [29]. From another prospect we can discuss limitations that might arise during accurate time-of-arrival measurements. A limitation on the maximum accu- racy has been discussed for several models in recent works of Oppenheim et al. [18], [19], [22], [23] . They have suggested a general limiting relation on the maximum accuracy achievable on time-of-arrival measurements. The proposed limitation was verified on several models but the proof is left as \u0010an interesting open question\u0011. We present their approach in this chapter, and follow this aspect of the time-of-arrival registration 55 Chapter 11. Measurement of the Time-of-Arrival 11.1 Oppenheim et al. Approach to the Time-of-Arrival Problem In their simplest analysis of the problem Oppenheim et al. have applied a toy model clock to measure the time-of-arrival of a free particle in one dimension at a certain point x0 [19]. They have shown that time-of-arrival can not be precisely defined and measured quantum mechanically in their model measurement. Their toy model is based on the Hamiltonian Htot = P 2 2m + \u00CE\u00B8(x \u00E2\u0088\u0092 x0)Pc, where Pc is the clock's Hamiltonian and P is the momentum of the particle moving in the x direction. \u00CE\u00B8(z) is the step function which is equal to one for positive z's and zero otherwise. The clock runs only if the particle is to the left of x = x0. The equations of motion for the particle and the clock's pointer Xc are x\u00CC\u0087 = Pm , P\u00CC\u0087 = Pc\u00CE\u00B4(x\u00E2\u0088\u0092 x0) and X\u00CC\u0087c = \u00CE\u00B8(x\u00E2\u0088\u0092 x0), P\u00CC\u0087c = 0. The time-of-arrival that the clock registers would be Xc(\u00E2\u0088\u009E) = Xc(t0) +\u00E2\u0088\u00AB\u00E2\u0088\u009E t0 \u00CE\u00B8(x(t) \u00E2\u0088\u0092 x0)dt . In the classical case, back-reaction on the particle can be made negligible choosing small Pc. So the undisturbed solution for the particle would be x(t) = x(t0) + Pm(t \u00E2\u0088\u0092 t0) and the clock finally reads tA = Xc(\u00E2\u0088\u009E) = \u00E2\u0088\u0092mx(t0)P , which is the classical result for the time-of-arrival measured from t0. However, in the quantum mechanics we can expect a strong back reaction, since in the limit 4Xc = 4tA \u00E2\u0086\u0092 0, Pc has a large uncertainty. That is the measurement affects the particle strongly. By solving for the wave function for the problem, they showed that the probability to stop the clock has the form of ( E+Ec E ) 1 2 ( 2 \u00E2\u0088\u009A E\u00E2\u0088\u009A E+ \u00E2\u0088\u009A E+Ec )2 where E and Ec are the energies of the incoming particle and the clock respectively. This probability is almost one only if EEc > 1; on the other hand the uncertainty principle for the clock implies that possible value of Ec is of the order of 1\u00CF\u0084 if the average clock energy goes to zero. So in order to trigger the clock we should have \u00E3\u0080\u0088E\u00E3\u0080\u0089 \u00CF\u0084 > 1 . If the aforementioned constraint be violated, i.e. if EEc \u00E2\u0089\u00AF 1 then the incoming particle reflects back because of the clocks induced energy barrier at the detection point x0 and therefore no detection is done. 56 Chapter 11. Measurement of the Time-of-Arrival They also have considered different models for the particle detectors, and arrived at the same kind of difficulties found in this model. From their analysis of the effect of the back-reaction of the clock on the system on different models, they have suggested a relation for the maximum accuracy possible in measurements of the time-of-arrival, \u00CF\u0084 , which is \u00CF\u0084 > 1E , where E is the incoming particle's typical energy. This relation has some ambiguity on what really is referred to by E. In their works the E is being interpreted sometimes as the typical initial kinetic energy of the incoming particle21 ([18] page 40) and some other times, the expectation value of the particle's energy([18] page 83). 11.2 General Limitation on Time-of-Arrival Measurements In our approach which is similar to Oppenheim et al. approach, we derive a relation for the same concept. In this approach, we apply the relation we found for the clock's energy and accuracy, on a quite simple and general model. This will lead us to a formal proof of the relation for the accuracy of the time-of-arrival measurements. Consider the following general setup for the time-of-arrival experiment: A clock is set to measure the time-of-arrival of a free particle at the point x = 0 Htot = P 2x 2m + \u00CE\u00B8(x)Hclock where Px is the incoming particle's momentum. In this setup, the moving particle in the x direction, interacts with the clock for locations after the origin. The clock only starts working if the particle passes the location x = 0. The time-of-arrival then can be known by reading the clock after some long time22. We can set the mean energy of the clock equal to zero and deal with a 21What is the zero of energy? 22By this setting we avoid possible complexities related to the future collapse of the clock's wave function. 57 Chapter 11. Measurement of the Time-of-Arrival Figure 11.1: Clock's Induced Step Potential clock with zero mean energy and an energy spread of 4Eclock around the mean energy as defined in equation (9.5). A simple analysis for such a model can be done by looking for the least clock energy that would allow the particle to pass the origin and turn the clock on23, and be registered. If the particle can not pass the origin and trigger the clock the experiment is unsuccessful in registering the arrival of the particle. From the particle's point of view, introducing the clock into the problem is equivalent to having an energy step with the height of \u00C2\u00B14Eclock. From basic quantum mechanics, we know that if the energy of the particle is less than the energy step height, it will be reflected back and there is no chance to find the particle in the other side of the origin. This fact gives us a necessary condition on the incoming particle's energy in order for the particle to pass the origin and switch the clock Ep \u00E2\u0089\u00AE 4Eclock (11.1) 23Or off, depending on the direction of the incoming particle and the settings. 58 Chapter 11. Measurement of the Time-of-Arrival Figure 11.2: Clock Coupled to the System with Negative Coupling Coeffi- cient Considering this illustration for the problem, we can write the condition for a successful time-of-arrival measurement as Ep \u00E2\u0089\u00A5 4Eclock, combining with equation (9.3) we get \u00CF\u0084 \u00E2\u0089\u00AE 1 Ep (11.2) There is however also another situation in measure the time-of-arrival, which seems to provide us with more successful results. There is times that the clocks energy is in its lowest, and the particle interacts with a negative energy step of the depth of 4Eclock (Fig. 3). In that case the equation (11.1) is satisfied anyway; however, we should also consider the back reaction arises by introducing the sudden energy change at origin x = 0. This will give us another sufficient condition in order to have a successful measurement. Solving Schrodinger equation for the energy step with the depth of4Eclock we get T = 4kq (k+q)2 for transmission coefficient, with k = \u00E2\u0088\u009A 2mEp and 59 Chapter 11. Measurement of the Time-of-Arrival q = \u00E2\u0088\u009A 2m (Ep +4Eclock) , which result in the transmission coefficient T = 4 \u00E2\u0088\u009A 1 + 4EclockEp( 1 + \u00E2\u0088\u009A 1 + 4EclockEp )2 To have a successful measurement, i.e. almost certain transmission of particle from the origin, we need to have Ep > 4Eclock. Combining this with equation (9.3) we have \u00CF\u0084 > 1 Ep (11.3) Equation (11.3) is basically what that had been verified in the works of Oppenheim et al. [18], [19], [22], [23] for several well constructed models. In order to avoid the back reaction causes by the energy step (clock), they also have suggested a model for gradual triggering the clock [19]. As they have shown, while it is possible, in principle, to introduce a correct- ing potential to smooth the step, the introduction of any additive potential changes the problem and the registered time does not reflect the arrival time of the free particle any more. 11.3 Stating the Time-of-Arrival Inaccuracy Relation We derived the limitation for the accuracy of the time-of-arrival measure- ments. The relation we derived is basically the relation proposed by Op- penheim et al in [18], [19], [22], [23]. However as mentioned earlier, in their relation it is not clear to which energy they refer exactly in the relation \u00CF\u0084 > 1E . From our derivation and illustrations, we can establish the correct inter- pretation of E in the time-of-arrival accuracy relation: there exists a funda- mental limitation on the accuracy which we can use to register the time-of- arrival. The accuracy of the measurements can not get better than \u00CF\u0084 > 1 Ep where Ep is the mean energy of the incoming particle, to be measured in 60 Chapter 11. Measurement of the Time-of-Arrival compare to the clock's zero energy. This is clear from the illustrations lead to the deriving the equations (11.3). 11.4 Inaccuracy in the Time-of-Arrival Measurement, a General Feature of Quantum Physics? The main issue that we faced in this chapter which prevents us from suc- cessful registration of the time-of-arrival for a free particle was the reflection of the particle off the step potential induced by the clock. This feature is a dynamical property of the non-relativistic free particle's Hamiltonian H = P 2 2m . We can avoid this effect, however, in some other setups which particles would follow other Hamiltonians such as H = P (in case of relativistic par- ticles) or H = P 3. For the Hamiltonian H = P , the Schrodinger equation can be written as H\u00CF\u0088 = \u00E2\u0088\u0092i ddx\u00CF\u0088. Therefore for an incoming particle from left we have \u00CF\u0088L(x, t) = A0eip(x\u00E2\u0088\u0092t) +AReip(\u00E2\u0088\u0092x\u00E2\u0088\u0092t) and \u00CF\u0088R(x, t) = AT ei(p\u00E2\u0088\u00924Eclock)(x\u00E2\u0088\u0092t). Imposing the boundary conditions at origin x = 0, that are \u00CF\u0088L(0, t) = \u00CF\u0088R(0, t) and i ddx(\u00CF\u0088R \u00E2\u0088\u0092 \u00CF\u0088L) = 4Eclock, gives us AT = A0 and AR = 0. Thus we do not get any reflection off the step potential in this Hamiltonian case. Similar analysis can be done for the case H = P 3; one may alternatively consider the phase velocity of the incoming wave for this case vp = p2 which is always positive. Therefore we do not get any reflection in this case as well. In such cases we have one way particles that switch the clock anyway. Therefore the limitation we found on the accuracy of time-of-arrival reg- istration is a general feature only in the case of measurements on the non- relativistic free particles. 61 Chapter 11. Measurement of the Time-of-Arrival A key feature of the construction we presented in this chapter is that our derivation for the limiting relation on the accuracy of time-of-arrival measurements is not tied to specific choice of the Hamiltonian that describes the non-relativistic particle's dynamics prior to the moment of registration. We may measure the time-of-arrival of a non-relativistic particle successfully, provided we have the mean energy of the particle just before entering the detector. The procedure and accuracy setup that one follows to measure the time-of-arrival should not depend in principle on particles past dynamics. 62 Chapter 12 Applications and Examples 12.1 Quantum Zeno Effect As we illustrated by an example in section 10.2, attempting to observe a system's evolution with accuracies higher than system's orthogonality time t \u00E2\u0088\u00BC 14\u00CE\u00B5 can dramatically slow down the system's evolution. In formal quantum literature such effect, named \u0010quantum Zeno effect\u0011 or the \u0010watched pot paradox \u0011 has been discussed widely [24], [25] and is ex- perimentally verified [26]. It says that continuous observation of an unstable system cause the system to not changes its state. Briefly the argument goes as follows: Suppose an unstable system with initial state |\u00CF\u0088\u00E3\u0080\u0089, evolving after a time t to the state e\u00E2\u0088\u0092iHt |\u00CF\u0088\u00E3\u0080\u0089. Thus the probability of survival of the initial state is \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u008C\u00A9\u00CF\u0088, e\u00E2\u0088\u0092iHt\u00CF\u0088\u00E2\u008C\u00AA\u00E2\u0088\u00A3\u00E2\u0088\u00A32 ' 1 \u00E2\u0088\u0092 (4H)2 t2 for small times24 and where (4H)2 = \u00E3\u0080\u0088H\u00CF\u0088,H\u00CF\u0088\u00E3\u0080\u0089 \u00E2\u0088\u0092 \u00E3\u0080\u0088\u00CF\u0088,H\u00CF\u0088\u00E3\u0080\u00892. It follows if the projector operator on the initial state |\u00CF\u0088\u00E3\u0080\u0089 is measured after a short time t, the probability to find the positive result is 1\u00E2\u0088\u0092 (4H)2 t2. However, if the measurement is performed n times at intervals t/n, the probability that all the results will be positive, is ( 1\u00E2\u0088\u0092 (4H)2 ( tn)2)n > 1\u00E2\u0088\u0092 (4H)2 t2. The left hand side then tends to 1 as n \u00E2\u0086\u0092 \u00E2\u0088\u009E. That means the initial state under continual observation never evolves with time. This effect is similar to an effect in classical mechanics where coupling an oscillating system to another high frequency oscillating system halts the original system's oscillation [25]. 24We consider here only Hamiltonians with finite moments so Taylor series expansion exists. 63 Chapter 12. Applications and Examples Figure 12.1: Einstein box thought experiment of 1930 as designed by Bohr. Einstein box was supposed to prove the violation of the \u0010spread-time\u0011-energy uncertainty relation. (reproduced by courtesy of the Niels Bohr archive, Copenhagen) 12.2 Bohr-Einstein Debate, the Einstein Box In one of the epistemological challenges that Albert Einstein presented against Niels Bohr on the Copenhagen interpretation of quantum mechanics, he pro- posed a weighting gedanken experiment contradicting \u0010spread-time\u0011-energy uncertainty relation, Eq(8.1). In this experiment a photon from among those inside the box is allowed to escape through the hole which is temporarily opened by a shutter. The opening time is controlled by a clock which is part of the box system. Einstein argued that it is possible to calculate the energy emitted by the outgoing photon through weighing the box before and after the opening period. Thus it seems that one can obtain an arbitrarily precise value for the energy of the photon, while at the same time the time period of emission of the outgoing photon can be as short as one desires, by setting the clock appropriately. This conclusion is in contrary to the \u0010spread-time\u0011-energy uncertainty relation (8.1). Bohr's rebuttal [34] was based on the observation that the accuracy of 64 Chapter 12. Applications and Examples the weighing process is limited by the inaccuracy of the box momentum, which in turn limits the inaccuracy of the position by virtue of the position- momentum uncertainty relation. The uncertainty in the box position entails an uncertainty in the rate of the clock, as a consequence of the fact that energy has weight [33]. Thus, the accuracy of calculating the photon en- ergy and the uncertainty of the opening time of the shutter do satisfy the aforementioned uncertainty relation. We can present a more direct way of rejecting Einstein's challenge rather than using Bohr's sophisticated way of reasoning. The argument makes no assumptions concerning the method of measurement and is simply based on a property of quantum clocks. This argument goes as follows: If the photon energy is to be calculated with the inaccuracy \u00CE\u00B4E from the difference of box energies before and after the opening period, then those energies should be well defined within \u00CE\u00B4E. So the Einstein's box energy uncertainty, 4E, must satisfy 4E \u00E2\u0089\u00A4 \u00CE\u00B4E. However, the time-energy relation (8.6) between the orthogonality time and energy uncertainty, gives us the conclusion that the Einstein box system needs at least the time \u00CF\u00840 ' ~4E in order to evolve from the initial \u0010closed- shutter\u0011 state to the orthogonal \u0010open-shutter\u0011 state. During this time it is intrinsically indeterminate whether the shutter is open or closed. Accord- ingly, the time interval that the photon can pass the shutter is indeterminate by an amount of at least \u00CF\u00840. The argument, in contrast to Bohr's argument, does not use the position- momentum relation for the box components; instead it refers directly to the dynamical quantum features of the box. Close analogy can be made for this Einstein box and the time-of-arrival problem; the above limitations admits the interpretation that it is impossible to determine the energy and time of passage of a particle with accuracies better than that \u00CF\u00840 ' ~4E . 65 Chapter 13 Conclusion We have argued different time-energy relations, their derivations and inter- pretations. Like other discrete quantities in quantum mechanics we see that quantum system's evolution is also discrete in time, and a system goes to next state in times not less than 14\u00CE\u00B5 where 4\u00CE\u00B5 is the amount of the energy span of the system around its mean energy value . Also we showed that in quantum physics we do not have time operator and using the quantum clocks leads to the notion of discrete time registra- tion. The quantum nature of the clock pointers result in an energy-time uncertainty for an ensemble of clock-systems. This uncertainty is not over the time coordinate. It arises since we have to correspond the \u0010time\u0011 to some other observable eigenvalue for which that uncertainty relation holds- it is a secondary uncertainty relation, not a fundamental one. There exist another fundamental relation between the accuracy of a clock (or pragmatically speaking \u0010time\u0011 as it measures) and its energy, due to quantum discreteness of its evolution.. In the time-of-arrival problem, we showed that energy considerations place a limit on the time accuracy of time-of-arrival registration for a non- relativistic particle. This time accuracy limit has been suggested before in the works of Oppenheim et al. while its proof had been left as an open question. We provided the formal prove to that suggested limitation. 66 Bibliography [1] E. Schrodinger, \"Die gegenwrtige Situation in der Quantenmechanik\". Naturwissenschaften 23, pp. 807-812; 823-823, 844-849. (1935). English translation: John D. Trimmer, Proceedings of the American Philosoph- ical Society, 124, 323-38 (1980), Reprinted in Quantum Theory and Measurement, p 152 (1983). [2] E.P. Wigner,: 'Remarks on the Mind-Body Question', in ,\u0011The Scientist Speculates\u0011, ed. I. J. Good pp. 284302, 1961. [3] Y. Aharonov and D. Bohm, Phys. Rev 122 1649 (1961) [4] J.G. Muga and C.R. Leavens, Physics Reports, 338, 353 (2000) [5] J.G. Muga, R. Sala Mayato, I.L. Egusquiza (eds) \u0010Time in quantum mechanics\u0011, (Springer Verlag), 2002 [6] G.R. Allcock, Ann. Phys, 53, 253 (1969) [7] G.R. Allcock, Ann. Phys, 53, 286 (1969) [8] W. Pauli, 'Die allgemeinen Prinzipien der Wellenmechanik ' in \u0010Hand- book of physics\u0011, eds. H. Geiger and K. Schell, Vol.24 Part 1, (Berlin, Springer Verlag), 1958. [9] V. Delgado, J.G. Muga, Phys. Rev. Lett. 56, 3425-3435 (1997) [10] M. Bunge, Can.J. Phys, 48, 1410 (1970) [11] W.G. Unruh. Phys.Rev. A 50, 882-887 (1994) http://prola.aps.org/ abstract/PRA/v50/i1/p882_1 67 Bibliography [12] L. Mandelstam, Ig. Tamm, J.Phys. (U.S.S.R) 9, 249 (1945) [13] E.P. Wigner, in \u0010Aspects of Quantum Theory\u0011, edited by A. Salam and E.P. Wigner (Cambridge, London, 1972), pp.237-241 [14] N. Margolus, L.B. Levitin, Physica D120, 188-195 (1998) http:// arxiv.org/abs/quant-ph/9710043 [15] L. Landau, R. Peierls, Z.Physik 69, 56 (1931) [16] J. Anandan, Y. Aharonov, Phys. Rev. Lett. 65, 1697-1700 (1990) [17] D.H. Kobe, V.C. Aguilera-Navarro, Phys. Rev. A. 50, 933 (1994) [18] J. Oppenheim, \u0010Quantum Time\u0011, Thesis(PhD), The University of British Columbia, (2000) http://www.damtp.cam.ac.uk/user/jono/ thesis.html [19] Y. Aharonov, J. Oppenheim, S. Popescu, B. Reznik, W.G. Unruh, Phys. Rev. A. 57 4130 (1998) [20] A. Peres, Am. J. Phys. 48, 552 (1980) [21] J.J. Sakurai, Modern Quantum Mechanics (Addison-Wesley, 1985) p.80 [22] J. Oppenheim, B. Reznik, W.G. Unruh, quant-ph/9801034 [23] J. Oppenheim, B. Reznik, W.G. Unruh, Found. Phys. Lett. 13, 107 (2000) [24] B. Misra, E.C.G. Sudarshan, J. Math. Phys. 18, 756 (1977) [25] A. Peres, Am. J. Phys. 48, 931 (1980) [26] W.M. Itano, D.J. Heinzen, J.J. Bollinger, D.J. Wineland, Phys. Rev. A. 41, 2295 (1990) [27] J. von Neumann, Mathematical Foundations of Quantum Mechanics (Princeton University Press, reprinted 1955) 68 Bibliography [28] J.G. Muga, R. Sala, J.P. Palao, Superlattices and Microstructures 23, 833 (1998) [29] A.D. Baute, R. Sala, J.P. Palao, G.J. Muga, Phys. Rev. A. 61, 22118 (2000) [30] J.B. Hartle, Phys. Rev. D. 38, 2985 (1998) [31] H. Salecker, E.P. Wigner, Phys. Rev. 109, 571 (1958) [32] Y.J. Ng, H. van Dam, Mod. Phys. Lett. A9, 335 (1994); ibid. A10, 2801 (1995) [33] W.G. Unruh, G.I. Opat, Am. J. Phys. 47, 743 (1979) [34] N. Bohr, 'Discussion with Einstein on Epistemological Problems in Atomic Physics' in \u0010Albert Einstein: Philosopher-Scientist\u0011 edited by P.A. Schilpp (Open Court, LaSalle 1949), pp.201-241 69 Appendix A Expectation Value and the Standard Deviation of Two Random Vectors Dot Product < u|v > For two randomly chosen unit vectors in a m dimensional complex vector space the mean value of their dot product is zero due to symmetry; since as much as it can be positive, it can be negative. Thus in average it is zero: \u00E3\u0080\u0088u|v\u00E3\u0080\u0089 = 0. To evaluate the standard deviation we need to calculate \u00CF\u00832 = ( \u00E3\u0080\u0088u|v\u00E3\u0080\u00892 \u00E2\u0088\u0092 \u00E3\u0080\u0088u|v\u00E3\u0080\u00892 ) . We can choose the z direction to correspond with the direction of the first unit vector and the internal product simplifies to \u00E3\u0080\u0088u|v\u00E3\u0080\u0089 = cos \u00CE\u00B8 where \u00CE\u00B8\u00C2\u00B2[0, pi] in a m dimensional unit sphere. Therefore \u00CF\u00832 = (cos \u00CE\u00B8)2 = \u00E2\u0088\u00AB pi 0 cos 2 \u00CE\u00B8d\u00E2\u0084\u00A6m, where \u00E2\u0084\u00A6mis the solid angle in m dimensional sphere. To evaluate the above mentioned integral, we notice that the relevant part of the solid angle which works as weight function in relation to the cos2 \u00CE\u00B8 and involves \u00CE\u00B8, is the \u0010surface\u0011 on the \u0010sphere\u0011 above the direction which the 70 Appendix A. Expectation Value and. . . second vector points and that is proportional to sinm\u00E2\u0088\u00922 \u00CE\u00B8d\u00CE\u00B8. Therefore \u00CF\u00832 = (cos \u00CE\u00B8)2 = \u00E2\u0088\u00AB pi 0 cos 2 \u00CE\u00B8d\u00E2\u0084\u00A6m \u00E2\u0088\u009D \u00E2\u0088\u00AB pi 0 cos 2 \u00CE\u00B8 sinm\u00E2\u0088\u00922 \u00CE\u00B8d\u00CE\u00B8 =\u00E2\u0088\u00AB pi 0 ( sinm\u00E2\u0088\u00922 \u00CE\u00B8 \u00E2\u0088\u0092 sinm \u00CE\u00B8) d\u00CE\u00B8 = \u00E2\u0088\u00AB pi 0 sinm\u00E2\u0088\u00922 \u00CE\u00B8d\u00CE\u00B8 \u00E2\u0088\u0092 \u00E2\u0088\u00AB pi 0 sinm \u00CE\u00B8d\u00CE\u00B8 =( \u00E2\u0088\u0092sin m\u00E2\u0088\u00923 \u00CE\u00B8 cos \u00CE\u00B8 m\u00E2\u0088\u0092 2 \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3pi 0 + m\u00E2\u0088\u0092 3 m\u00E2\u0088\u0092 2 \u00E2\u0088\u00AB pi 0 sinm\u00E2\u0088\u00924 \u00CE\u00B8d\u00CE\u00B8 ) \u00E2\u0088\u0092( \u00E2\u0088\u0092sin m\u00E2\u0088\u00921 \u00CE\u00B8 cos \u00CE\u00B8 m \u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3\u00E2\u0088\u00A3pi 0 + m\u00E2\u0088\u0092 1 m \u00E2\u0088\u00AB pi 0 sinm\u00E2\u0088\u00922 \u00CE\u00B8d\u00CE\u00B8 ) = ( m\u00E2\u0088\u0092 3 m\u00E2\u0088\u0092 2 \u00E2\u0088\u00AB pi 0 sinm\u00E2\u0088\u00924 \u00CE\u00B8d\u00CE\u00B8 ) \u00E2\u0088\u0092 ( m\u00E2\u0088\u0092 1 m m\u00E2\u0088\u0092 3 m\u00E2\u0088\u0092 2 \u00E2\u0088\u00AB pi 0 sinm\u00E2\u0088\u00924 \u00CE\u00B8d\u00CE\u00B8 ) = ( 1\u00E2\u0088\u0092 m\u00E2\u0088\u0092 1 m )( m\u00E2\u0088\u0092 3 m\u00E2\u0088\u0092 2 \u00E2\u0088\u00AB pi 0 sinm\u00E2\u0088\u00924 \u00CE\u00B8d\u00CE\u00B8 ) = 1 m ( m\u00E2\u0088\u0092 3 m\u00E2\u0088\u0092 2 \u00E2\u0088\u00AB pi 0 sinm\u00E2\u0088\u00924 \u00CE\u00B8d\u00CE\u00B8 ) = 1 m m\u00E2\u0088\u0092 3 m\u00E2\u0088\u0092 2 m\u00E2\u0088\u0092 5 m\u00E2\u0088\u0092 4 \u00C2\u00B7 \u00C2\u00B7 \u00C2\u00B7 { 1 2pi even m 1 2 odd m m\u00C3\u00801\u00E2\u0088\u0092\u00E2\u0086\u0092 1 m Therefore in a m dimensional vector space we get \u00E3\u0080\u0088u|v\u00E3\u0080\u00892 goes to zero as 1 m and so the standard deviation of the aforementioned quantity is \u00CF\u0083 \u00E2\u0088\u009D \u00E2\u0088\u009A 1 m 71 Appendix B Geometrical Method to Derive Orthogonality Time We will now sketch the outline of Anandan and Aharonov [16] method to derive the orthogonality time. By using Schrodinger equation, i~ ddt |\u00CF\u0088(t)\u00E3\u0080\u0089 = H(t) |\u00CF\u0088(t)\u00E3\u0080\u0089, we can Taylor expand |\u00CF\u0088(t+ dt)\u00E3\u0080\u0089 to second order in dt as |\u00CF\u0088(t+ dt)\u00E3\u0080\u0089 = |\u00CF\u0088(t)\u00E3\u0080\u0089\u00E2\u0088\u0092 idt ~ H |\u00CF\u0088(t)\u00E3\u0080\u0089\u00E2\u0088\u0092 dt 2 2~ ( i dH ~ |\u00CF\u0088(t)\u00E3\u0080\u0089+ 1 ~ H2 |\u00CF\u0088(t)\u00E3\u0080\u0089 ) +O(dt3) to get |\u00E3\u0080\u0088\u00CF\u0088(t)|\u00CF\u0088(t+ dt)\u00E3\u0080\u0089|2 = 1\u00E2\u0088\u00924E2dt2 +O(dt3) (B.1) with (4E)2 = \u00E2\u008C\u00A9H2\u00E2\u008C\u00AA \u00E2\u0088\u0092 \u00E3\u0080\u0088H\u00E3\u0080\u00892 as usual definition. Thus redefining the origin of time we have |\u00E3\u0080\u0088\u00CF\u0088(0)|\u00CF\u0088(dt)\u00E3\u0080\u0089|2 = 1\u00E2\u0088\u00924E2dt2 +O(dt3) (B.2) We can think of a sphere, similar to Bloch sphere, as a geometrical repre- sentation of the pure state space of a certain dimensional quantum system. For a two dimensional quantum system, it is easy to visualize the Bloch sphere construction; the mapping of two components of a pure state to two dimensional surface of the Bloch sphere is made by assigning to any state |\u00CF\u0088\u00E3\u0080\u0089 = cos \u00CE\u00B82 |0\u00E3\u0080\u0089+ei\u00CF\u0086 sin \u00CE\u00B82 |1\u00E3\u0080\u0089 a point on the sphere with the coordinate (\u00CE\u00B8, \u00CF\u0086). We can extend this notion for any higher dimensional state space in principle. On the surface of such sphere they defined the metric ds2 = g\u00C2\u00B5\u00CE\u00BD\u00CC\u0084dZ\u00C2\u00B5dZ\u00CC\u0084\u00CE\u00BD \u00E2\u0089\u00A1 1\u00E2\u0088\u0092 |\u00E3\u0080\u0088\u00CF\u0088|\u00CF\u0088 + d\u00CF\u0088\u00E3\u0080\u0089|2 (B.3) 72 Appendix B. Geometrical Method. . . where Z\u00C2\u00B5's are coordinates in that state space. Using this metric we can measure the distance between states; it is a well defined metric, distance of any state from itself is zero, while it has maximum distance with its orthogonal state which is 1. The general form of the metric can be derived by considering the nor- malization and the freedom of phase of a component. Lets choose Z1 to be real and with \u00E2\u0088\u0091 i |Zi|2 = 1 we get Z1 = \u00E2\u0088\u009A 1\u00E2\u0088\u0092 \u00E2\u0088\u0091 i=2 ZiZ \u00E2\u0088\u0097 i . Thus the form of the metric is gij\u00E2\u0088\u0097dZidZ \u00E2\u0088\u0097 j = 1 4 (\u00E2\u0088\u0091 i=2 dZiZ \u00E2\u0088\u0097 i + ZidZ \u00E2\u0088\u0097 i )2 1\u00E2\u0088\u0092 \u00E2\u0088\u0091 i=2 ZiZ \u00E2\u0088\u0097 i + \u00E2\u0088\u0091 i=2 dZidZ \u00E2\u0088\u0097 i If we consider the time evolution of any state to its orthogonal state, at any time we can write |\u00CF\u0088(t)\u00E3\u0080\u0089 = cos \u00CE\u00B6 |\u00CF\u00880\u00E3\u0080\u0089+ sin \u00CE\u00B6 |\u00CF\u0088\u00E2\u008A\u00A5\u00E3\u0080\u0089 with \u00CE\u00B6 = 0 corresponds to no time evolution and \u00CE\u00B6 = pi2 happens when the state evolves to the orthogonal state for the first time. If we expand the quantum state around \u00CE\u00B6 = 0, we get |\u00CF\u0088(dt)\u00E3\u0080\u0089 = ( 1\u00E2\u0088\u0092 d\u00CE\u00B6 2 2 ) |\u00CF\u00880\u00E3\u0080\u0089+ d\u00CE\u00B6 |\u00CF\u0088\u00E2\u008A\u00A5\u00E3\u0080\u0089+O ( d\u00CE\u00B63 ) So the metric reads ds2 = 1\u00E2\u0088\u0092 |\u00E3\u0080\u0088\u00CF\u0088(0)|\u00CF\u0088(dt)\u00E3\u0080\u0089|2 = 1\u00E2\u0088\u0092 (( 1\u00E2\u0088\u0092 d\u00CE\u00B6 2 2 ))2 = d\u00CE\u00B62 (B.4) Now if we demand that the evolution of the system to its orthogonal state happens only due to the change of the time coordinate, substituting Eq(B.2) into Eq(B.4) gives us the relation 4Edt = d\u00CE\u00B6. So for the minimum time -the distance on the time-geodesic on the surface of the Bloch type sphere- that 73 Appendix B. Geometrical Method. . . should pass for an arbitrary state in order to get to an orthogonal state, we get the relation t\u00E2\u008A\u00A5 4 E = pi2 . Thus in general, where the evolution of the state is not confined only to the time coordinate, an arbitrary state can evolve to an orthogonal state only in times t\u00E2\u008A\u00A5 which hold the relation: t\u00E2\u008A\u00A5 4 E \u00E2\u0089\u00A5 pi2 (B.5) 74 Appendix C Fundamental Limitations on Quantum Clocks Using the fundamental principles of quantum mechanics and general relativ- ity on the short space-time distances, we can extract some limitations on the accuracy, mass, size and maximum duration of the usability of a clock. Following Salecker and Wigner [31] proof, the argument briefly goes as this: If the clock pointer has a linear spread of \u00CE\u00B4r, then its momentum uncertainty is ~/\u00CE\u00B4r. After a time \u00CF\u0084 , its position spread grows to \u00CE\u00B4r(t) = \u00CE\u00B4r+~\u00CF\u0084m\u00E2\u0088\u00921(\u00CE\u00B4r)\u00E2\u0088\u00921 with the minimum at \u00CE\u00B4R = (~\u00CF\u0084/m)1/2. After total running time T for the clock, the linear spread can grow to \u00CE\u00B4R > ( ~T m ) 1 2 However for the clock to measure time with the accuracy of \u00CF\u0084 , its pointer should have a small enough spread in position that a quantum of light which strikes it to read the time can be determined within the required accuracy \u00CF\u0084 , thus \u00CE\u00B4R . c\u00CF\u0084 . That means we require that clock pointer wave function to be confined to a region of the size c\u00CF\u0084 throughout the running time T. Accordingly we will have the lower bound on m m & ~ c2\u00CF\u0084 ( T \u00CF\u0084 ) (C.1) for a given T and \u00CF\u0084 . This limit is more restrictive than the \u0010time\u0011-energy uncertainty relation since it requires repeated measurement of time to not to cause significant disturbance over accuracy over the total running time T. 75 Appendix C. Fundamental Limitations on Quantum Clocks Further limits has been found by Ng and van Dam [32] on the mass of a clock pointer and its accuracy. Their argument is quite simple: Let the clock be a simple system consisting of two parallel mirrors, each of mass m/2 between which a beam of light bounces. For the clock to be able to resolve time intervals as small as \u00CF\u0084 , the mirrors must be separated by a distance of d . c\u00CF\u0084 . Besides that d is necessarily larger than Schwartzchild radius of Gm/c2 for the mirrors, in order that the time registered by the clock can be read off at all. From these requirements an upper bound on mass of the clock follows: \u00CF\u0084 & Gm c3 (C.2) Substituting Eq.(C.1) into Eq.(C.2), we can relate accuracy of a clock to its maximum interval which it can keep the time accurate T . \u00CF\u0084 ( \u00CF\u0084 tP )2 where tP = \u00E2\u0088\u009A ~G c5 is the Planck time. Thus the better the accuracy of the clock, the shorter it can keep the time accurate. With the Planck time being about 10\u00E2\u0088\u009244sec, this bound on T does not seem to have any practical consequences yet. 76"@en .
"Thesis/Dissertation"@en .
"2008-05"@en .
"10.14288/1.0066156"@en .
"eng"@en .
"Physics"@en .
"Vancouver : University of British Columbia Library"@en .
"University of British Columbia"@en .
"Attribution-NonCommercial-NoDerivatives 4.0 International"@en .
"http://creativecommons.org/licenses/by-nc-nd/4.0/"@en .
"Graduate"@en .
"quantum mechanics"@en .
"quantum theory"@en .
"Schrodinger's cat"@en .
"time measurements"@en .
"Topics in quantum physics: Schrodinger's cat problem - time measurement accuracies in quantum mechanics"@en .
"Text"@en .
"http://hdl.handle.net/2429/204"@en .