Open Collections

Rainbow Ranche Collection

Pamphlet of Instructions from International Harvester Company of America [1908] International Harvester Company of America 1908

Item Metadata

Download

Media
rainbow-1.0354707.pdf
Metadata
JSON: rainbow-1.0354707.json
JSON-LD: rainbow-1.0354707-ld.json
RDF/XML (Pretty): rainbow-1.0354707-rdf.xml
RDF/JSON: rainbow-1.0354707-rdf.json
Turtle: rainbow-1.0354707-turtle.txt
N-Triples: rainbow-1.0354707-rdf-ntriples.txt
Original Record: rainbow-1.0354707-source.json
Full Text
rainbow-1.0354707-fulltext.txt
Citation
rainbow-1.0354707.ris

Full Text

 •
McC. 280   40M-9-15-05.
Preserve this Pamphlet for Reference when Repairs are Wanted.
DIRECTIONS
FOR
SETTING UP AND OPERATING
the:
New 4, and New Big 4 Mowers
WITH
PRICE LIST AND PLATES OF DUPLICATE PARTS
IM(%RTANT  RULES
1. See that your machine is propeHy set up and adjusted, as instructed in these
directions. •■•■-** A
2. Be sure that all nuts are screwed up perfectly tight. Watch all Bolts and nuts
on your machine and keep them tight.
3. See that the machine runs free in every part before putting it to work in the field.
4. Keep your knives sharp, and see that they work free and easy in the fingers
and shoes.
5. Keep all parts of your machine well oiled, and use nothing but the best lard
oil. Oil frequently, and never let any part get dry. Keep all oil cups filled with
cotton waste or tow, and well filled with oil. See Jiat oil holes do not get stopped
up     Before driving on the road, oil spur pinion at left of counter shaft.
6. When team is hitched to Mower* end of tongue should be about 2 feet and 8
inches from the ground.
7. The tilting lever dog may be regulated by its set screw so as to lock the finger
bar at every notch, or it may stop on any notch desired, and allow the finger bar to tilt
voluntarily to pass over stones, etc.
INTERNATIONAL HARVESTER COMPANY OF AMERICA,
(INCORPORATED.)
CHICAGO.   U-   S.   A.
OFFICE:   MICHIGAN AVENUE AND MONROE STREET,
i	 ™T"
1-.„
§
j
*
1
%i"ii«i^i«"ii«iiiS__
i
\f
.c2o/3,S7< 3>
DIRECTIONS
FOR SETTING UP
McCormick New 4,, and New Big 4 Mowers
1. Bolt the tongue in place on frame, and at the same time secure lifting lock
M 662 in place on tongue. Hook lifting spring link to the front, to flat connection
attached to lever holder.
2. Tilt shoe hinge up in front and hook in draft rod M 674 from above so that end
of hook is underneath, and hook other end into draft bracket M 807, and bolt the
latter, with doubletree in place to tongue.
3. Attach finger bar to shoe hinge. Hook gag lever M 726 into eye of lifting
lever connection, and double bent end of this connection into front end of lever casting M 762 from the right. Raise foot lever as high as possible, and slip gag lever on to
stud on shoe hinge and secure it there.
4. Hook curved end of Tilting rod in arm on shoe hinge, and short bent end into
tilting lever from left side, and bolt lever in place.
5. Slip in knife and see that it works freely; attach pitman to crank wheel, then
to knife, using small wrench M 231 to open socket plates so that they will slip on to
the knife head. Keep the pitman bolt screwed up snug, but not so tight as to bind.
Attention to this will prevent wear or breakage.
6. Slip long end. of pitman guard through hole under shoe hinge, then the short
end back into holes in pitman crank shield, and secure with cotter.    Attach separator-
rod M 666 to inside shoe,  and track clearer board to outsde shoe, and bolt on stick
and put on seat.
7. To fold the finger bar, simply raise it and see that the locking dog falls into
place.   To let it down, push towards machine and raise the lock.
I
____-_, *tt
PRICE LIST OF REPAIR PARTS
Cat. No.
M 72*
M
M
M
M
M
72*
77
78
90
91*
132
M 139
M 147
M 152
M 219
M 219*
M 231
MA256
M 257
M 259
M 290
M 294
M 295
M 296
M 304
M 308
M 314
M 315
M 316
M 317
M 325
M 3251:
M 325*
M 328
Name. Price.
Bushing Set Screw, f x| $0 05
Bushing Set Screw, * x f  05
Singletree Hook, right  10
Singletree Hook, left _ 10
Wrist Pin,____  50
Wrist Pin Nut   05
Section Rivets, * per lb  15
Knife Head _. 25
Socket Strap for Pitman  25
Hexagon Horned Nut, f  05
Ledger Plate, smooth  04
Ledger Plate  04
Pitman Wrench  10
Track Clearer Stick Plate ___ 15
Sole Bracket _  15
Outside Shoe Sole  40
Inside Shoe Cap   15
Pawl, right  10
Pawl, left _  10
Pawl Spring __  05
Socket Strap for Pitman  25
Fly Wheel Shaft Bushing  75
Ledger Plate, Inside Shoe . _ _
Pitman Pivot Strap, upper __
Pitman Pivot Strap, lower..
Pitman Box 	
Outside Shoe Bolt, If x*	
Shoe Bolt, 2*x* __._._
Shoe Bolt, lfx* 	
Track Clearer Stick	
Cat. No.
M 328*
M 329
M 329*
M 330
M 331
M 331*
M 332
M 333
M 343
M 353
M 357
M 371
M 372
M 372*
M 383*
M 392
M 393
M 407
M 408
M 409
M 444
M 446
MA461
Name.| Price.
Track   Clearer   Stick   Bolt,
ftx2| $0 04
Guard Bolt and Nut      04
Guard Bolt, long      04
Ledger Plate, Outside Shoe.. 04
Knife, 4* foot, M 139 Head,
18 sec. (New 4 only).__.___ 2 40
Knife, 4* foot, M 139 Head,
17 Sec. (New 4 only) 2 35
Knife, M 139 Head, 20 Sec... 2 50
Knife Section . _. __     05
Fly  Wheel   Shaft   Bushing,
upper  _      50
Spring Holder ... _.      20
Bevel Shaft Bushing ..     50
Tool Box Handle . .     10
Tool Box Latch _____      10
Tool Box Latch Spring      05
Lifting Lever Washer      10
Pitman, complete 1 50
Pitman Wood      35
Coupling Bar Pin      30
Knife,  M 139 Head,  24 Sec.
(New Big 4 only) 2 75
Knife, M 139 Head, 28 Sec.
(New Big 4 only) 3 00
Coupling Bar Washer      20
Monkey Wrench      25
Detent Handle Lifting Lever     20
X*-Z    IMTft M90      trniL
.,,.n iiinniiimiillll
M72tf   'M72H.   M77   "'•
i
Cat. No. Name. Price.
M 462 Guard (Smooth Ledger Plate)$0 25
M 462Ser. Guard (Serrated Ledger Plate)...      25
M 463   KnifeHolder.      10
M 465   Inside Shoe Sole      50
M 466   Sole Bracket.      15
M 468   Knife Wearing Plate      10
M 482   Pitman Lock Nut      05
M 483   Pitman    Socket   Bolt,    Left
Thread      05
M 483* Pitman     Pivot    Bolt,    Left
Thread 05
M 484 Pitman Socket Bolt Spring __ 05
M 484* Pitman Pivot Bolt Spring...     05
MA488   Seat  100
M 488* Seat Bolt        05
M 489   Seat Spring 2 00
M 490   Inside Shoe Wearing Plate ..     10
M 527   Oil Cup Cover       05
M 539   ToolBoxCover       60
M 589   Singletree.       50
M 589* Singletree Strap      10
M 625   Main Wheel (New 4 only)... 6 00
M 626   Spur Gear  ... 2 50
M 627   Ratchet Hub       90
M 628   Main Axle (New 4 only) 3 50
Cat. No. Name. price.
M 629   Axle Washer $0 10
M 630   Roller Bushing, complete      75
M 633   Spur Pinion..._      75
M 635   Bevel Pinion (New 4 only)...     50
M 637   Shipper      35
M 637* Shipper Pin       20
M 638   Shipper Case..      25
M 639   Shipper Handle      30
M 640   Shipper Springs      10
M 641   Oil Cup Cover, _      05
M 641* Oil Cup Cover Spring      05
M 642   Countershaft _      80
M 643   Gear Cover  1 25
M 644   Fly Wheel Shaft (New 4 only) 1 00
M 645* Coupling Bar 5 00
M 647 Fly Wheel Shield Set Screw. 10
M 649 Pitman Shield (New 4 only). 80
M 649* Pitman   Shield   (New Big 4
only)....        80
M 650   Inside Shoe Hinge... 2 25
M 652   Knife Head Cap       15
M 655   Tilting Lever  _.     60
M 656   Tilting Lever Detent       25
M 656* Tilting Lever Detent Thumb
Screw _       05
M 657   Tilting Lever Detent Guide..      15
MA 256 o
Cat No.
MA657*
M 658
M 659
M 659a
M 660
M 662
M 664
M 665
M 666
Ma667
M 668
M 669
M 672*
M 673*
M 674
M 675
M 677
M 678
Name. Price.
Tilting Lever Detent Rod __.$0 10
Tilting Lever Lock       50
Tilting    Lever    Connection
Complete (New 4 only).._ 50
Tilting   Lever    Connection,
long end (New 4 only)    ..     15
Lifting Lever       40
Lifting Lever Lock      75
Lifting    Lever    Connection
(New 4 only)        20
Lifting Lever Detent Spring.     10
Inside Shoe Rod      20
Lifting Lever Detent Rod      20
Tilting Lever Detent Spring.     10
Foot Lever (New 4 only)      40
Main Frame (New 4 only).._ 8 00
Doubletree Bolt      10
Draft Rod.      25
Tongue   2 00
Pitman Box Plug__      05
Spur Gear Shield.      50
Cat. No. Name. Price.
M 679   Spur Gear Shield Clip $0 15
M 680   Spur   Gear   Shield   Bracket,
upper      30
M 681   Spur  Gear   Shield   Bracket,
lower..      25
M 683   Inside Shoe Pin      30
M 725* Fly Wheel Shield 1 25
M 726   Gag Lever      50
M 727   Bar Lock      30
M 728   Inside Shoe 2 00
Ma729   Outside Shoe 1 50
M 734   Fly Wheel 1 00
M 737   Lifting Lever Socket      50
M 761   Lifting Lever Holder      20
M 761* Lifting Spring Link      30
M 762   Lifting Lever Sector      75
M 777    Lifting Spring       80
M 786* Main Frame (New Big 4 only) 9 00
M 787 Main Wheel (New Big 4 only) 7 00
M 788   Main Axle (New Big 4 only). 3 75
"TT
'
Cat. No. Name. Price
M 789   Tilting    Lever    Connection
(New Big 4   only) $0 20
M 790a Tilting Connection, long end
(New Big 4 only)      15
M 791   Foot    Lever    (New   Big    4
only)      40
M 792   Fly Wheel Shaft (New Big 4
only).. _ 100
M 807   Draft Bracket....      90
M 808   Draft Spring       50
M 809   Draft Spring Bolt ._      10
M 810   Doubletree Strap Clevis      15
M 813   Bevel Gear (New 4 only) 2 00
M 814   Clutch _      60
M 815   Fly Wheel Shield Bracket...     15
M 819   Tilting   Connection   Adjustment      20
M 819* Tilting Connection Hook      10
Cat. No.
M 837
M 838
M 972
M 972c
M 972*
M 973
M 992
B 570
B 571
D 266
Ha71
H 156
H 588
H 722
H 758
L 64
L
Z
78
Name. Price.
Bevel Gear (New Big 4 only).$2 00
Bevel   Pinion   (New   Big   4
only)  50
Spring Tracker Board  50
Spring Tracker Bolt...  05
Spring Tracker Adjustment. 25
Spring Tracker Spring  15
Tongue Tip Hook Bolt  10
Neckyoke, 34*" . 50
Neckyoke Eye Bolt  10
Outside Shoe Sole Bolt _  05
Detent Handle  20
Oil Can  ._ 15
Raising Lever Detent  10
Punch  10
Cold Chisel _  10
Hexagon Horned Nut, *  05
Draft Bracket Pin  10
Doubletree  60
< S^ «=
§xmimm «^_______^)
M808 M809
M792
M810       S-8L5
«___> m
MA8191/.       H__8
S^% D266 *m®i
I
"jf wwwwi       @      _______^==
*Ha71 ^O   M973     L64   *       Z78
MA1_9
____ 1

Cite

Citation Scheme:

        

Citations by CSL (citeproc-js)

Usage Statistics

Share

Embed

Customize your widget with the following options, then copy and paste the code below into the HTML of your page to embed this item in your website.
                        
                            <div id="ubcOpenCollectionsWidgetDisplay">
                            <script id="ubcOpenCollectionsWidget"
                            src="{[{embed.src}]}"
                            data-item="{[{embed.item}]}"
                            data-collection="{[{embed.collection}]}"
                            data-metadata="{[{embed.showMetadata}]}"
                            data-width="{[{embed.width}]}"
                            async >
                            </script>
                            </div>
                        
                    
IIIF logo Our image viewer uses the IIIF 2.0 standard. To load this item in other compatible viewers, use this url:
http://iiif.library.ubc.ca/presentation/cdm.rainbow.1-0354707/manifest

Comment

Related Items