Open Collections

Spotts, Isaac

University of British Columbia

This thesis presents techniques to alleviate deficiencies in ultrafast experimentation. Liquid crystal assisted optical delay is the first proposed technique. This work improves sensitive time-domain sampling for ultrafast measurements. This work investigates the effectiveness of using a liquid crystal wave modulator to provide the incremental steps in between a coarse movement mechanical delay stage. To quantify the improvement that the liquid crystal wave modulator provides to the ultrafast measurement, an autocorrelation is conducted with the liquid crystal wave modulator present and absent. Ultimately, this liquid crystal wave modulator technique is applied to measure terahertz pulses. The second proposed technique is a computational processing method to reduce the noise floor in terahertz time-domain spectroscopy, thereby reducing the integration time required for a useable signal. The computational processing method is based on Kalman filtering. The results from the computational processing method provide a significant reduction in the noise floor and therefore reduce the required acquisition time significantly. The third proposed method to improve ultrafast measurement is the focal positioning and numerical aperture for injecting charge carriers inside a photoconductive terahertz emitter. The relationship between charge carrier lifetime and terahertz radiation emission is investigated to provide insight into the optimal focusing conditions for a terahertz photoconductive antenna made from low-temperature grown gallium arsenide. Overall, this thesis demonstrates three methods to improve the measurement of ultrafast systems, with an emphasis on terahertz time-domain spectroscopy.

Text

2024-12-09

Attribution-NonCommercial-NoDerivatives 4.0 International

http://hdl.handle.net/2429/89801

Electrical Engineering

University of British Columbia

UBCO

http://creativecommons.org/licenses/by-nc-nd/4.0/