Open Collections

Xia, Yakang

University of British Columbia

Pool boiling is a promising solution for meeting the heat dissipation requirements in high-heat-flux applications such as supercomputers, nuclear reactors, and laser generators. Surface characteristics greatly influence boiling heat transfer, which makes it crucial to understand their impact for enhanced heat transfer surface design. However, certain aspects of pool boiling, especially bubble behaviors and heat transfer with wettability contrast remain unclear. This thesis investigates the influence of surface wettability, textures, and orientation on pool boiling heat transfer using water as the working fluid. The research includes five steps. Firstly, thin-film heaters are fabricated to enable precise temperature measurements with an infrared camera. Microstructures are created on the boiling surface using laser ablation. Together with silanization grafting, different surfaces ranging from super-hydrophilic to super-hydrophobic are produced. Secondly, experimental studies are conducted focusing on observing injected air bubble formation and motion behaviors to understand the effects of surface wettability. Results demonstrate that surface wettability significantly influences bubble size and departure frequency, and bubbles spread to the super-hydrophobic region due to wettability contrast. Thirdly, pool boiling tests on different wetting surfaces show differences in bubble formation and departure. Nucleate boiling curves indicate that the heat transfer coefficient and critical heat flux generally increase as surface wettability transitions from super-hydrophobic to super-hydrophilic. The quantitative assessment of surface effects using surface-fluid factor confirms higher values for super-hydrophobic surfaces. For hydrophilic surfaces, the effect remains relatively constant over the nucleate boiling range, while hydrophobic surfaces show dependency on heat flux. These findings are consistent with boiling tests on a biphilic surface comprising super-hydrophobic and super-hydrophilic regions. Fourthly, a biphilic surface is designed to enable vapor bubbles to move on the surface, resulting in enhanced heat transfer compared to a super-hydrophilic surface. The driving force responsible for the directional spontaneous bubble movement on the surface is analyzed. Furthermore, investigating the influence of surface inclination angle reveals better heat transfer performance in vertical pool boiling. This study not only elucidates the influence of surface wettability on bubble behaviors and heat transfer but also provides valuable insights for understanding and optimizing the surface design to enhance boiling heat transfer.

Text

2023-09-15

Attribution-NonCommercial-NoDerivatives 4.0 International

http://hdl.handle.net/2429/85939

Mechanical Engineering

University of British Columbia

UBCO

http://creativecommons.org/licenses/by-nc-nd/4.0/