UBC Faculty Research and Publications

Active noise control communication headsets for the entertainment industry Thom, Jadine; Peters, Cheryl; MacIntyre, Elaina; Winters, Meghan; Teschke, Kay; Davies, Hugh Aug 31, 2005

Your browser doesn't seem to have a PDF viewer, please download the PDF to view this item.

Item Metadata


52383-ANCHeadsetsFinalRevised.pdf [ 580.11kB ]
JSON: 52383-1.0048186.json
JSON-LD: 52383-1.0048186-ld.json
RDF/XML (Pretty): 52383-1.0048186-rdf.xml
RDF/JSON: 52383-1.0048186-rdf.json
Turtle: 52383-1.0048186-turtle.txt
N-Triples: 52383-1.0048186-rdf-ntriples.txt
Original Record: 52383-1.0048186-source.json
Full Text

Full Text

ACTIVE NOISE CONTROL COMMUNICATION HEADSETS FOR THE ENTERTAINMENT INDUSTRY August 2005  Prepared for: Safety and Health in Arts Production and Entertainment (SHAPE) Suite 280 - 1385 West 8th Avenue Vancouver, BC V6H 3V9  Prepared by: Jadine Thom, Cheryl Peters, Elaina McIntyre, Meghan Winters, Kay Teschke, Hugh Davies* School of Occupational and Environmental Hygiene 2206 East Mall Vancouver, BC V6T 1Z3 *Corresponding author  Active Noise Control Communication Headsets  page 2 of 24  Executive Summary This literature review was produced at the request of SHAPE, the association for Safety and Health in Arts Productions and Entertainment. SHAPE asked us to provide information on state of the art techniques in reducing noise exposure. We conducted a systematic and comprehensive review of the scientific literature with respect to two methods: (1) controlling noise exposure, via active noise control headsets (the subject of this report) and (2) reducing hearing damage, via pharmaceutical interventions (the subject of a short report titled “Drug Treatments for Hearing Loss”, which follows). Active noise control (ANC) headsets are very similar to regular communication except that they have built in active noise control systems that reduce the amount of ambient (unwanted) noise. In an ANC headset, a small microphone on the outside of the headset picks up the unwanted, external noise, and instantaneously emits a counter-signal that cancels it out, leaving only the desired communication signal. ANC devices are primarily used today by aircraft pilots. However they have been tested in other occupations characterized by high levels of background noise and the need for accurate communication. These devices may be able to reduce the ambient noise in entertainment work environment, thus increasing speech intelligibility, and potentially lowering damaging noise at the ear. This report provides a technical background to the concept of active noise control, discusses its use in the entertainment industry and provides guidance on how to select the appropriate device.  Active Noise Control Communication Headsets  page 3 of 24  Table of Contents  Executive Summary ...........................................................................................................................................2 Table of Contents ..............................................................................................................................................3 Introduction ...................................................................................................................................................4 What is active noise control? .......................................................................................................................4 Active noise control headsets ......................................................................................................................6 How might active noise control communication headsets be useful in the entertainment industry? ..........................................................................................................................................................................8 Is your unwanted noise external background noise? ...........................................................................8 Is your unwanted noise emitted by the headset?................................................................................11 Summary .......................................................................................................................................................11 Acknowledgments............................................................................................................................................12 References………………………………………………………………………………………...15 Appendix 1: Literature Search Strategy ........................................................................................................15 Appendix 2: Summary of articles that assessed noise exposure from headsets......................................16 Appendix 3: Summary of ANC headset articles..........................................................................................19  Active Noise Control Communication Headsets  page 4 of 24  Introduction Is your current communication headset not working out for you? Do you find yourself raising the volume on your headset in order to hear the person with whom you are trying to communicate? Then, perhaps you will find this report useful. It describes active noise control and how it is currently being used in headsets to reduce the ambient noise from your surroundings, enabling you to lower the volume on your headset, reducing your noise exposure from your ambient surroundings and from the headset itself, and lowering your risk for developing noise-induced hearing loss. By the end of this report, you should understand the principle behind active noise control and how it is being employed in communication headsets. You will then be able to make an informed decision, based on your type of noise exposure, about whether an active noise control headset is right for you, and which type might be best for your work situation.  What is active noise control? In order to understand how an active noise control communication headset may be useful it is first necessary to explain what active noise control is and how it works. Sound, as you may know, has wave-like properties when it travels through air. Just like the waves that roll up onto the beach, sound waves have crests and valleys. How tall and how deep those crests and valleys are will determine the amplitude and loudness of the sound. Sound waves that are very tall and deep will be very loud, and sound waves that are short and shallow will be very quiet (Figure 1). Figure 1 - Low amplitude (quiet) sound waves compared to high amplitude (loud) sound waves  Active Noise Control Communication Headsets  page 5 of 24  The distance between the crests and valleys will determine the frequency, or what is commonly known as the pitch of the sound. If the waves are squished together, the sound will be very high pitched and squeaky and if the waves are stretched out, the sound will be low pitched, like a low hum (Figure 2). Figure 2 - High frequency/pitch sound waves compared to low frequency/pitch sound waves  If there are two sound waves present, the waves overlap and “interfere” with each other. When the two waves have the same frequency and directly overlap (i.e. they have the same phase) the result is constructive interference and the noise will double in amplitude. However, if the two waves have the same frequency and amplitude but they are shifted slightly in time (i.e. they are “out of phase”), then the waves cancel each other out and you get destructive interference. The result of destructive interference is that no noise (or sound) will be heard (Figure 3). Active noise control uses destructive interference to cancel out unwanted noise. The frequency, amplitude and phase of the undesired sound are measured and another sound of the same frequency and amplitude but opposite phase is created. When destructive interference occurs, noise is reduced. Therefore, in order for active noise control to function, it is necessary to know the frequency, amplitude and phase of the undesired sound. Active noise control works best for cancelling lower frequency sounds that are continuous; higher frequency and impulse sounds are hard to control.  Active Noise Control Communication Headsets  page 6 of 24  Figure 3 - Constructive interference compared to destructive interference  Active noise control headsets Active noise control headsets are very similar to regular communication headsets (i.e. one or two-way communication) except that they have built in active noise control systems that reduce the amount of lower frequency ambient noise (i.e. the noise created by surroundings) so that the wearer will be able to better hear the higher frequency sound and speech that is being transmitted to the headset. These headsets are available commercially and are produced by several companies for a variety of industries. They also come in a variety of styles, from those that only cover part of the ear, to those that surround the entire ear, like an ear muff hearing protector. (Behar 2001) The latter type of headset is more useful because they can reduce the noise produced by sounds across a spectrum of frequencies (a.k.a. broadband noise). With the active noise control turned off, the headset functions similarly to an ear muff hearing protector, which decreases the sound in the high frequency range (high pitched sounds). This can be seen in Figure 4 taken from Feist, Mongeau et al. 2001. It shows three sound traces: The uncontrolled sound (solid line) The sound experienced while wearing the ANC headset, but with the ANC function turned off (dashed line) The sound experienced while wearing the ANC headset, but with the ANC function turned on (dotted line) Sound is on the vertical axis and frequency is located on the horizontal axis.  Active Noise Control Communication Headsets  page 7 of 24  Figure 4 - Effect of ANC headset on sound levels  So how does the active noise control system know the all important characteristics of the noise it is trying to reduce such as the frequency, amplitude and phase as discussed in the previous section? Well, there are essentially two types of active noise control (ANC) that are currently being researched, each with their own advantages and disadvantages. These two types are “feed-forward ANC” and “feed-back ANC”. (University of Twente 2005) In feed-forward ANC, the system is programmed to cancel out a specific noise. That is, the frequency and amplitude of the sound are known, and they can be programmed into the system and a secondary noise is created which cancels out the first noise. (Pawelczyk 2003) This type of ANC is most useful when the noise exposure is continuous and predictable. An example of such noise may be the noise created by the vibration of a tractor. (University of Twente 2005) Headsets of this type are not appropriate if the unwanted external noise is being created by a moving source as the amplitude of the noise will not consistent in this circumstance – it will vary as the distance between the source and the receiver changes. (Gan and Kuo 2002) In feed-back ANC, a small microphone located on the earshell of the headset picks up the signal of the external noise. This signal from the primary noise is analyzed for its frequency, amplitude and phase, and a secondary noise is created by the system that will result in destructive interference and cancel out the noise. This type of ANC is most useful when the noise you are attempting to reduce is broadband or unpredictable in terms of frequency or amplitude. It is a more accurate noise cancellation method than feed-forward ANC. You can have different signals being received and processed at each ear. (Gan and Kuo 2002) It is also considered to be cheaper and more compact than feed-forward ANC. (Gan and Kuo 2002) Figure 5 was taken from Gan and Kuo 2002 and shows the basic setup of a feed-back ANC system. However, it may be possible to get the best of both worlds. Researchers are currently looking at combining the two systems (feed-forward and feed-back) in a single headset. The feed-back control is thought to reduce broadband noise while the feed-forward system reduces periodic noise. (Rafaely and Jones 2002) It may also be possible to get ANC headsets that control the noise that is  Active Noise Control Communication Headsets  page 8 of 24  transmitted to the ear from vibration of the earshell using vibration actuators which produce a force that opposes the earshell vibration. (Rafaely, Carrilho et al. 2002) Figure 5 - Basic setup of a feed-back ANC headset  How might active noise control communication headsets be useful in the entertainment industry? Now who might benefit from ANC communication headsets? To date, they have been used primarily by airplane pilots to reduce low frequency aircraft noise (Gower and Casali 1994; Giguere, Abel et al. 2000). They have also been tested by tollbooth operators for their ability to reduce traffic noise (Feist, Mongeau et al. 2001). Table 2 in the Appendix provides more detail on the studies that have been conducted assessing noise exposure from headsets. However, it seems completely plausible that ANC communication headsets, particularly those that are regulated by feed-back mechanisms, would be of use in the entertainment industry. They may be able to reduce the ambient noise on movie sets for example, thus increasing the wearer’s ability to hear and understand the conversation being communicated through the headset itself, often referred to as speech intelligibility. Although no studies have been conducted to date on the noise exposure from communication headsets in the entertainment industry, it is suspected that noise exposure may take one of two forms. Either the unwanted noise is loud ambient noise that is interfering with speech intelligibility or the unwanted noise is created by the headset itself (e.g. from feed-back or static). In order to determine if active noise control will be useful in your particular work situation, you will need to understand the nature of the source of the noise, and whether its frequency is low or high.  Is your unwanted noise external background noise? In the first case where the unwanted noise is external background noise, the problem can be solved using active noise control. In such instances, it will be necessary to conduct a noise survey to assess your exposure to noise. In particular you will want to know the frequency range and the  Active Noise Control Communication Headsets  page 9 of 24  loudness of your noise source or sources, and whether or not the sound varies for any reason – for example is it stationary relative to your position. Are the frequency and amplitude variable? Is the distance between you and the noise source changing? If you find that the noise has varying frequency and amplitude, or that you or the noise source move around a lot, then feed-back ANC headsets will likely be more useful. It is expected that most of the situations that you will encounter in the entertainment industry will fall in this category (e.g. loud explosions or people talking around you). As can be seen from Table 1 below, there are many feed-back ANC headsets available commercially. Of these, the David Clark website is the easiest to navigate, and their headsets come in a variety of styles for a number of different uses. However, some of these manufacturers only produce ANC headsets for the airline industry. It may also be possible to modify an existing headset by fitting a microphone inside the earshell connected to an analog feedback control circuit. The Lectret headset was modified in this manner. (Rafaely and Jones 2002) Are the frequency and amplitude of the noise constant? distance between you and the noise source consistent?  Is the  If you find that the noise is relatively constant in frequency, loudness and distance, then a feedforward ANC headset may provide adequate protection. Most situations in the entertainment industry will not fall under this category. However, if you find that you are exposed to this kind of noise, feed-forward headsets are also available commercially, possibly by some of the same manufacturers that are listed in Table 1. If you would like to read about further studies that have evaluated, tested or produced ANC communication headsets, then refer to Table 3 in the Appendix. (Note: This table has a high level of detail and is intended for those readers with a good understanding of noise and active noise control.)  Active Noise Control Communication Headsets  page 10 of 24  Table 1 - ANC headsets that have been identified in the scientific literature and reference websites where more information (e.g. prices) may be obtained Headset  ANVT  Bose Aviation headset  David Clark H1013X/DCNC  Description and Reference Website performance Supra-aural headset with ANC at 70-400 Hz, and (Zera, Brammer n/a et al. 1997) passive noise control above 3000 Hz circumaural (Gower and headset designed Casali 1994; http://qualitysound.bose.com/headsetx_headset_ind for aviation Giguere, Abel et ex.htm industry, feedback al. 2000) ANC unknown  (Giguere, Abel et al. 2000)  circumaural headset with QuietMan headset (Zera, Brammer attenuation of by MNC et al. 1997) frequencies below 1000 Hz Noise Control Technology Group  Peltor 7004  Peltor ANR Aviation headset  Feed-back  (Feist, Mongeau et al. 2001)  circumaural headset, attenuates (Zera, Brammer frequencies below et al. 1997) 300 Hz active personal (Giguere, Abel hearing protection et al. 2000) device  http://www.davidclark.com/  n/a  http://www.nctgroupinc.com/nbex.htm  discontinued product  Sennheiser NoiseGard  Feed-back  (Giguere, Abel et al. 2000)  TechnoFirst NoiseMaster  unknown  (Giguere, Abel http://www.volez.com/store/article.tpl?ref=TECH et al. 2000) FIRST_CASQUE1 (in French)  Telex ANR 4000  Feed-back  (Giguere, Abel et al. 2000)  http://www.pilotstuff.com/Sennheiser.html  n/a  Active Noise Control Communication Headsets  page 11 of 24  Is your unwanted noise emitted by the headset? If the unwanted noise is more akin to the second case where the noise is being emitted by the headset itself, then active noise control may not be as useful. Several noise exposure studies have been conducted on call centre operators and telephone operators who may be exposed to noise from fax machines or acoustic feedback through their headsets. (Macrae 1995; Brueck 2003; Peretti, Pedrielli et al. 2003; Bayley 2004) In one particular study, the noise exposures of 150 call centre operators were measured. (Patel and Broughton 2002) Although the authors concluded that the call centre operators had a low risk of hearing damage from their occupational noise exposure they did suggest that the instalment of acoustic shock limiters may reduce their noise exposures. Acoustic shock limiters control noise in the form of short sound bursts. Discussions of this method of noise control go beyond the scope of this report, but the authors refer to the work of a group of scientists in Australia that may provide more information and that are studying the adverse health effects of these acoustic shock events. (Milhinch and Doyle 2000; Patuzzi, Milhinch et al. 2000)  Summary The following is designed to assist in choosing the appropriate noise control strategy for your headset noise problem. Figure 6 - Picking the appropriate noise control strategy  Active Noise Control Communication Headsets  page 12 of 24  In conclusion, now that you know what active noise control is and how it works in ANC communication headsets, you should now be able to decide if an ANC communication headset will work for your particular headset noise exposure problem, and which one you should consider buying or modifying.  Acknowledgements We would like to acknowledge the guidance and advice provided by Ms. Linda Kinney of SHAPE, and helpful discussion with Ms. Ingrid Turk.  Active Noise Control Communication Headsets  page 13 of 24  References Bayley, A. M. W. (2004). "Acoustic limiting in telephony headset systems." Acoustics Bulletin 29(5): 22. Behar, A. (2001). "Testing of ANR (active noise reduction) headsets." Canadian Acoustics 29(3): 52. Brammer, A. J., D. R. Peterson, et al. (2004). "Maintaining speech intelligibility in communication headsets equipped with active noise control." Canadian Acoustics - Acoustique Canadienne 32(3): 132. Brueck, L. (2003). "Measurement and Instrumentation Group: Call Centres - A Measurement Headache." Acoustics Bulletin 28(5): 7. Campbell, R. H. (1975). "Electroacoustic properties of noise attenuating headsets." Journal of the Audio Engineering Society 23(10): 806. Cartes, D. A., L. R. Ray, et al. (2002). "Experimental evaluation of leaky least-mean-square algorithms for active noise reduction in communication headsets." Journal of the Acoustical Society of America 111(4): 1758. Cartes, D. A., L. R. Ray, et al. (2002). "Low frequency acoustic test cell for the evaluation of circumaural headsets and hearing protection." Canadian Acoustics 30(1): 13. Cui, J., A. Behar, et al. (2003). "Insertion loss testing of active noise reduction headsets using acoustic fixture." Applied Acoustics 64(10): 1011. Dajani, H., H. Kunov, et al. (1996). "Real-time method for the measurement of noise exposure from communication headsets." Applied Acoustics 49(3): 209. Feist, J. P., L. Mongeau, et al. (2001). "Tollbooth operators' response to traffic noise and the performance of an active noise control headset survey results: Survey results." Transportation Research Record(1756): 68. Gan, W.-S. and S. M. Kuo (2004). Integration of virtual bass reproduction in active noise control headsets, Beijing, China, Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ 08855-1331, United States. Gan, W. S. and S. M. Kuo (2002). "An integrated audio and active noise control headset." IEEE Transactions on Consumer Electronics 48(2): 242. Gan, W. S. and S. M. Kuo (2003). Integrated active noise control communication headsets, Bangkok, Thailand, IEEE. Giguere, C., S. M. Abel, et al. (2000). "Binaural technology for application to active noise reduction communication headsets: design considerations." Canadian Acoustics 28(1): 3. Gower, D. W., Jr. and J. G. Casali (1994). "Speech intelligibility and protective effectiveness of selected active noise reduction and conventional communications headsets." Human Factors 36(2): 350. Macrae, J. H. (1995). "Hearing conservation standards for occupational noise exposure of workers from headphones or insert earphones." Australian Journal of Audiology 17(2): 107. Milhinch, J. and J. Doyle (2000). Acute aural truama in headset and handset users. 14th National Conference of the Audiological Society of Australia, Adelaide, Australia. Patel, J. A. and K. Broughton (2002). "Assessment of the noise exposure of call centre operators." Annals of Occupational Hygiene 46(8): 653. Patuzzi, R. B., J. Milhinch, et al. (2000). Acute aural trama in telephone headset and handset users. NeuroOtological Society of Australia National Conference, Melbourne, Australia. Pawelczyk, M. (2002). "Analogue active noise control." Applied Acoustics 63(11): 1193. Pawelczyk, M. (2002). "Feedforward algorithms with simplified plant model for active noise control." Journal of Sound and Vibration 255(1): 77.  Active Noise Control Communication Headsets  page 14 of 24  Pawelczyk, M. (2003). "A hybrid active noise control system." Archives of Control Sciences 13(49)(2): 191. Peretti, A., F. Pedrielli, et al. (2003). "Headphone noise: Occupational noise exposure assessment for communication personnel." Acta Acustica (Stuttgart) 89(SUPP): 49. Rafaely, B., J. Carrilho, et al. (2002). "Novel active noise-reducing headset using earshell vibration control." Journal of the Acoustical Society of America 112(4): 1471. Rafaely, B. and M. Jones (2002). "Combined feedback-feedforward active noise-reducing headsetThe effect of the acoustics on broadband performance." Journal of the Acoustical Society of America 112(3): 981. Ritter, D. C. and J. L. Perkins (2001). "Noise-induced hearing loss among U. S. Air force cryptolinguists." Aviation Space & Environmental Medicine. Vol. 72(6): 546-552. Savell, J. F. and M. T. Boothby (1996). Noise exposures from earphones, Bellevue, WA, USA, Inst of Noise Control Engineering, Poughkeepsie, NY, USA. University of Twente, D. o. M. E., Laboratory of Mechanical Automation. (2005). "Course notes: 113172 - Advanced motion and vibration control. Chapter 2: Theory of active noise control." Retrieved May 23, 2005, from http://www.wa.wb.utwente.nl/Lectures/113172/avicrdr.pdf. Williams, W. and J. Presbury (2003). "Observations of noise exposure through the use of headphones by radio announcers." Noise & Health. Vol. 5(19): 69-73. Zera, J., A. J. Brammer, et al. (1997). "Comparison between subjective and objective measures of active hearing protector and communication headset attenuation." Journal of the Acoustical Society of America 101(6): 3486.  Active Noise Control Communication Headsets  page 15 of 24  Appendix 1: Literature Search Strategy Four bibliographic databases were used to identify the literature for this review: PubMed, CCINFOWeb, Compendex/Inspec, and Web of Science. PubMed, produced by the U.S. National Library of Medicine, specializes in health literature. CCINFOWeb, produced by the Canadian Centre for Occupational Health and Safety, specializes in occupational health and safety literature. Compendex contains information on engineering, and some noise measurement papers were located using this database. The search was conducted in February 2005 and employed combinations of the following keywords: noise and exposure, headphones, headsets, earphones, cryptoling*, hearing protectors, active noise control. In addition, a significant portion of the literature cited within this review was identified through pearling, or hand searching of references found within other papers. We excluded articles which were written in languages other than English and French. Finally, with respect to potential control measures, a Patent search was conducted using similar search terms.  Active Noise Control Communication Headsets  page 16 of 25  Appendix 2: Summary of articles that assessed noise exposure from headsets Author & Date (Macrae 1995)  Publication type Primary  (Dajani, Kunov et al. 1996)  Primary  Purpose  Population  Method  To determine an optimal method for measuring noise exposure at the eardrum to telephonists that use headphones or insert earphones while working  telephonists  Proposes two methods for measuring noise from the earphones at the eardrum, a probe-tube microphone inserted into the ear canal and a coupler  Measurement on noise exposure from communication headsets on an acousto-mechanical mannequin head. Method validation on human subjects in real-world applications  mannequin head, 8 industries: air traffic controllers, telephone operator, reservations operators, telephone cable maintenance workers and airport ground crew  For human measurements, measured noise levels under the headset (variety of types) with microphone and environmental noise was measured with a sound level meter  Results  Comments Identifies telephonists as an at risk group, and lists Australian OEL for noise exposure at the eardrum (8hr-LeqA = 90 dB, and Lpeak of 143 dB)  People that worked in the airport had higher Leq8hr than office or street setting. High environmental noise may contribute to noise exposure becasue it causes workers to increase levels so that they can hear. Greater attenuation with modified circumaural hearing protector  Looked at noise exposure from the headset itself and from the environment  Active Noise Control Communication Headsets  Author & Date (Williams and Presbury 2003)  Publication type Primary  (Patel and Broughton 2002)  Primary  (Ritter and Perkins 2001)  Primary  page 17 of 25  Purpose  Population  Method  Results  Comments  noise exposure from headphones that allow monitoring of broadcast transmission and receive information from program producers To measure noise exposure of call centre operators  radio announcers (12)  During broadcast, an identical headphone was set up in parallel on an artificial ear connected to a sound level meter  Most not exposed to high noise exposures but some do have high noise exposures (Leq up to 95 dB)  Radio announcers may be a special case because they are using headphones to monitor their own quality of voice transmission  Call centre operators (150)  Noise exposure unlikely to exceed 85dBA, risk of hearing damage is low. Higher exposures from fax tones, holding tones and high pitched tones from mobile phones (but shorter in duration so don't contribute much to overall exposure)  Large sample size. In discussion, mentions some control strategies: acoustic shock limiters (short sound bursts) (legal requirement DTI 85/013). Refers to work of Patuzzi (2000) and Milhinch and Doyle (2000) who are studying health effects of acoustic shock events.  To assess noise induced hearing loss in US air force cryptolinguists  Crypto-linguists (120)  An identical headphone was set up in parallel on a KEMAR mannequin connected to a microphone at the eardrum. Only measured in left ear. Right ear was sealed. Background noise levels were measured but not incorporated into estimate of Leq because not considered to be significant contribution Compared 1998 audiogram to reference audiogram and to enlistment audiogram.  Since incidence of PTS may exceed 3%, may signal that HCP is ineffective  Did not measure noise exposure itself.  Active Noise Control Communication Headsets  Author & Date (Brueck 2003)  Publication type Conference summary (Measureme nt and instrumentati on group)  Purpose  Population  review of presenters at the conference  call centre operators  (Peretti, Pedrielli et al. 2003)  Primary  headphone noise exposure  telephone operator  (Savell and Boothby 1996)  conference proceedings  to assess the noise exposure of workers given personal (music) radio headsets, especially worried about workers that raise the volume of their headsets in order to hear over background noise levels  two groups control and treatment (i.e. headset with adjustable volume)  page 18 of 25  Method  Results  head and torso simulator in 3 different workplace settings Headsets were of two types: walkman with headphones and headsets with radio incorporated into the headset, and were measured on artificial test fixture  Some workers may be at risk for hearing loss May result in overexposure (based on OSHA criterion of 80 dB), if headphones are turned up to highest volume for the entire 8 hour workday (range of 90 to 99 dBA TWA)  Comments  Authors did not expect the headphones to attenuate any of the background noise (not even passively). In fact, specifically avoided earmuff type headsets because they attenuate the noise.  Active Noise Control Communication Headsets  page 19 of 25  Appendix 3: Summary of ANC headset articles Author  Publication type Review  Control type  Product(s)  Theory/Purpose  Telephone headsets, acoustic limiting  Mention Plantronics as a manufacturer for these devices  Noise spikes may occur in cordless telephones (analogue, digital or Voiceover-IP), longer duration noises from fax or DTMF tones, acoustic feedback or network faults.  (Behar 2001)  Primary  ANR headsets  one supra-aural headset, 2 circumaural headsets, one flying helmet (No brands/models specified)  To compare insertion loss that is achieved from the different headset designs  Acoustical test fixture (artificial head) which allows for measurement of insertion loss. Pink noise emitted by loudspeakers in audiometric cabin  circumaural headsets seem to provide greater total insertion loss (approximately 15 dB below 500 Hz) than supra-aural (4 dB below 500 Hz)  (Brammer, Peterson et al. 2004)  Primary  ANR headsets  one feedback control headset and one feedforward control headset (brands/model not specified)  Comparison of the ability of the two headsets to maintain speech intelligibility  Headsets are worn by human or mannequin and noise reduction is measured using microphone inserted under earmuff. Speech transmission index (STI) was used to determine speech intelligibility.  In feedback control system, when input mic is located under the earmuff there is cancellation of noise and speech. Not a problem with feedforward.  (Bayley 2004) (representa tive from Plantronics )  Methods  Results  Comments  Acoustic limiting in cordless and mobile phones puts a limit on the voltage that can be transmitted through the telephone headset.  This technology is more useful if the noise is being emitted from the headset itself rather than exterior to the headset (ambient noise). Also could this technology be adaptable from telephones to sound attenuating headsets?  Active Noise Control Communication Headsets  Author  page 20 of 25  Publication type Review  Control type  Product(s)  Theory/Purpose  Methods  Results  Comments  noiseattenuating headset  n/a  n/a  n/a  n/a  Describes how to measure effectiveness of noiseattenuating headsets: acoustic attenuation, receiving sensitivity and frequency response of the headset, and microphone sensitivity  (Cartes, Ray et al. 2002) J Acoust Soc Am  Primary  ANR headset  modified prototype (Rockford Fosgate model FNQ1406)  Comparison of algorithms to optimize stability and performance of ANR systems  Headset is mounted with the earpieces on a flat plate in a low freq acoustic test cell and subjected to 4 noise sources.  They were able to pick a candidate algorithm which resulted in overall stability and performance in measured and simulated ANR experiments.  How accurate are flat plate measurements (our faces are not flat!)? Not sure what the implications are since this is a theoretical evaluation more than an evaluation of the headset itself.  (Cartes, Ray et al. 2002) Can Acoust  Primary  low frequency acoustic test cell  (Cui, Behar et al. 2003)  Primary  ANR headsets  (Campbell 1975)  Describes the development of a low frequency acoustic test cell which can be used to evaluation circumaural ANR headsets 5 types of headsets (brands/model s not specified)  Measurement of insertion loss of ANR headsets using experimenter designed acoustic test fixture (mannequin)  This is a proposed method for the measurement of insertion loss that doesn't involve human subjects.  Active Noise Control Communication Headsets  Author (Feist, Mongeau et al. 2001)  Publication type Primary  page 21 of 25  Control type  Product(s)  Theory/Purpose  Methods  Results  Comments  active noise reduction headset  Noise Buster Extreme open ear active noise control headphone, manufactured by Noise Control Technology Group Inc.  To reduce low frequency ambient traffic noise levels through active noise control will reduce risk of developing hearing loss, increase speech intelligibility between attendant and customer and increase comfort level of attendant  Using two questionnaires, evaluated subjective response of tollbooth operators to ambient noise (eg. traffic) with and without open ear active noise control headphone.  Reduction in ambient noise but no increase in speech intelligibility. ANR headset attenuates noise in the low freq range (<500 Hz). Headset itself (ANR off) attenuates noise in high freq range. Attendants did not find them to be comfortable and were unlikely to wear them while working. n/a  Subjective response to headsets  (Gan and Kuo 2002)  Review  Integrated feedback active noise control headsets  n/a  n/a  n/a  (Gan and Kuo 2003)  Primary  Integrated feedback active noise control headsets  designed by the authors  Describes the development and evaluation of an ANC headset  Integrated system that has feedback control combined with off-line and on-line modelling of the secondary path (i.e. noise picked up from error microphone), additional adaptive filter that cancels near-end noise before sending it to the far end. Had to develop algorithms to do this.  Based on computer simulation results, was able to attenuate the background noise by more than 30 dB while enhancing the near-end speech level by more than 25 dB  Easy to read, good background information. Explains advantages and disadvantages of feedforward and feedback control systems. Disadvantage of combination analog feedback and digital feedforward is the limited flexibility of the analog filter. This system may be able to compensate for that.  Active Noise Control Communication Headsets  Author (Gan and Kuo 2004)  (Giguere, Abel et al. 2000)  Publication type Primary  Review  page 22 of 25  Control type  Product(s)  Theory/Purpose  Methods  Results  ANR headset with good bass reproduction  not specified  Wubjective response to attenuation provided by headset when two sound tracks were played  Practical, cheap, lightweight and effective, cancels noise and enhances bass  ANR headsets and binaural technology  Peltor ANR aviation headset, Sennheiser NoiseGard, Bose Aviation headset, Bose Aviation Series II, David Clark DCNC headset, David Clark H1013X, Telex ANR headset system, Telex ANR 4000, TechnoFirst NoiseMaster  ANR attenuates low frequency environmental noise, but may also reduce wanted bass (esp in headsets for portable MP3 players, etc) Combination of ANR and binaural technology may allow for increase in speech intelligibility especially in aircraft cockpits  none presented  All headsets studied were analog, preferable to have digital because more compact. More research needed.  Comments  Binaural technology: signals are integrated from both ears  Active Noise Control Communication Headsets  Author (Gower and Casali 1994)  Publication type Primary  Control type  Product(s)  Theory/Purpose  Methods  Results  Comments  ANR and conventional headsets  ANC headset Bose Aviation, conventional David Clark H10-76  comparison of an ANR and conventional headset to see if the ANR increases speech intelligibility and noise attenuation in environments with high ambient noise (eg. aircraft noise)  Three headset configurations (ANR on, ANR off, and conventional) tested with pink (broadband) noise and M-2 Bradley Infantry vehicle (tank) (low freq bias esp at 50, 125, 250 Hz) noise emitted from loudspeakers in a lab on 9 subjects (6M, 3F) aged 19-26 Noise attenuation was measured using a Solartron-Schlumberger spectral analyser  Attenuation of noise with ANR headset, especially at low freq but no increase in speech intelligibility  This experiment was conducted in a laboratory environment, therefore the real-world application is questionable  Attenuation of noise by 15-20 dB from 200-450 Hz. Analog control is best for short distances between noise source an error microphone. Cheap to produce (approx 20 USD including passive headset). Attenuation of 30 dB over freq range 100 to 550 Hz, adaptation takes about 0.1 s.  A highly technical review article.  (Pawelczyk 2002)  Primary  active noise reduction headset  passive headset (Peltor H9A) equipped with loudspeaker (headphone)  The authors modified a passive headset by equipping it with a loudspeaker to create an ANC headset, analog control  (Pawelczyk 2002)  Primary  feedforward active noise control in active personal hearing protection device  not commercially available, constructed by the author  construction of an algorithm that will allow for attenuation of sound in APHPD quickly  Appl Acous  J Sound Vib  page 23 of 25  n/a  Not sure if this device is commercially available yet…due to quick response, may be good for controlling periodic noise?  Active Noise Control Communication Headsets  Author (Pawelczyk 2003)  Publication type Primary  Control type  Product(s)  Theory/Purpose  ANR headset with hybrid feedback control  not commercially available, constructed by the author  Investigation of a hybrid (analogue and discrete) feedback control system. Analogue controller attenuates broadband noise, and discrete controller attenuates dominant tones  page 24 of 25  Methods  Results  Comments  Perform as expected.  Excellent introduction on problems and issues surrounding ANR headsets.  (Rafaely and Jones 2002)  Primary  Feedbackfeedforward ANR headset  modified Lectret ANR headset (circumaural with analog feedback control and digital feedforward control)  Feedback control reduces broadband noise while feedforward reduces periodic noise  One subject was fitted with headset and exposed to white noise that was passed through filters in range 200 to 900 Hz in reverberation chamber (reverberant sound field) and laboratory (direct sound field). Noise measured with internal microphone.  Good broadband sound attenuation in reverberant sound field regardless of subject position. In direct sound field, best attenuation is achieved when the external reference mic is upstream of the propagating sound field.  Requires modification of commercially available headset. Only one subject.  (Rafaely, Carrilho et al. 2002)  Primary  ANR headset with earshell vibration control  modified passive headset (JSP, model KMO7236)  Additional noise that is transmitted to the ear via earshell vibration is reduced using vibration actuators which produce a force that opposes the earshell vibration instead of generating sound inside of the earshell as is the theory behind conventional ANR headsets  Theoretical model was constructed to predict how changes to the headset (inertial force actuator or a force actuator) would cause a reduction in earshell vibration. Followed up by experimental validation.  The preferable configuration involves the placement of a force actuator between the headband and the earshell because it does not increase the inertial weight or compromise comfort.  Requires modification of commercially available headset. Theoretical and laboratory based…real-world function?  Active Noise Control Communication Headsets  Author (Zera, Brammer et al. 1997)  Publication type Primary  page 25 of 25  Control type  Product(s)  Theory/Purpose  Methods  Results  Comments  ANC headsets  Peltor headset (model 7004), Quietman headset by MNC, and NQ100 hearing protector by ANVT  comparison of subjective (masked threshold, loudness balance) and objective (insertion loss) measures of active hearing protector and communication headset attenuation  In an anechoic chamber, subject (n=7) was surrounded by 4 loudspeakers emitting broadband (25-20000 Hz) pink noise at a sound pressure level of 110 dB while wearing hearing protection device  All three methods of measurement yielded similar results for Peltor. Peltor headset: ANC works primarily below 500 Hz, max attenuation of 18 dB at 125 Hz, NQ100 hearing protector: max attenuation of 17 dB at 200 Hz, not very good at attenuation in the high frequency range (4000-8000 Hz), smallest attenuation of all devices, Quietman headset: ANC functions at frequencies below 1000 Hz, range in attenuation with different subjects and different measurement techniques  Article has nice description and photos of all headsets. Peltor: circumaural headset, large volume earcup, attenuates sound below 300 Hz. Quietman: circumaural headset, smaller volume earcup, lighter, attenuates sound below 1000 Hz. NQ100: supra-aural, lightweight, attenuates sound from 70-400 Hz (actively) and above 3000 Hz (passively)  


Citation Scheme:


Citations by CSL (citeproc-js)

Usage Statistics



Customize your widget with the following options, then copy and paste the code below into the HTML of your page to embed this item in your website.
                            <div id="ubcOpenCollectionsWidgetDisplay">
                            <script id="ubcOpenCollectionsWidget"
                            async >
IIIF logo Our image viewer uses the IIIF 2.0 standard. To load this item in other compatible viewers, use this url:


Related Items